today we’re taking a look at a motorized sit-stand desk…Union Flexispot… you may have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was really favorable.
It’s extremely simple to put together, and it took my 11-year-old child and I (I mainly simply supervised) under an hour from start to finish.
It’s extremely tough and can hold a lot of weight. If you do not believe me, take a look at the video listed below of it running while there’s an individual lying down on it.
The electric raise/lower function is not just easy to use and fast, but it’s also remarkably smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to change in between the two without providing it much idea.
On top of being practical, it likewise looks fantastic in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is likewise valuable if your furry colleague likes to chew on or have fun with your cables.
Flexispot has choices that are far more inexpensive than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t necessarily a huge fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, however this is just a consequence of how sturdy the Flexispot is.
The hassle-free cable television tray was a little bit confusing to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the guidelines.
You will require to purchase an anti-fatigue mat to remain comfortable, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (because this indicated it was going to be durable) and also a little hesitant (since all of us know just how much of a difficulty putting together furniture can be).
The good news is, with the help of an educational YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t explained well in the directions.
Is it worth getting a standing desk?
Once put together, I like the smooth appearance of this desk. I’m positive any of the many diverse surfaces that it can be found in would look fantastic in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of office.
The quiet operation and height memory settings make it simple, effective, and peaceful to change between sitting and standing as lot of times as you want throughout the day.
This desk is durable. It can hold up to 335 lbs even while in operation, so if you have a significant home computer (or want to rest on it for some reason) it has you covered. It will likewise equally distribute weight no matter how unbalanced the weight you put on it is, it won’t wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is quite fundamental I attempted to get as near to that as I might on uplifts site with equivalent configurations the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is really five inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for evaluation however as you must know by now doesn’t affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can possibly get doing not have even any cable television grommets for go through the outdoors container
for the desktop was not damaged in any way which is entirely strange due to the fact that I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply very rough male if I had actually bought this I ‘d have been on the phone with customer service immediately they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function unusually absolutely where any kind of cable management materials whatsoever the frame on this unit is a single motor double phase style versus the double motor three-stage design that comes requirement with the uplift desk this can be updated also to both the dual stage dual motor and a three-stage double motor which pushes the cost of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this model does come standard with the control board that allows for up-and-down motion plus three memory spots with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is really quiet as in barely audible this outside a rate would be the one benefit I would give this system over the uplift desk and I want to take care here since this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift design over 35% more affordable even if you update this flexi spot test to the dual motor three-stage design it still is available in a hundred and seventy dollars cheaper than the uplift but less expensive does not imply inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that but the lateral stability of this desk the horizontal motion at this cost point it’s inappropriate it’s rub salt in the wound here they include a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the sound is absolutely frustrating to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here harmed as well my prepare for this desk at this moment is to lose the desk top and featured entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality office furnishings that will last you this at finest seems like a more affordable replica of that it just doesn’t feel quality and the difference in between this desk and my main desk is night and day do feel free to check out their website also which likewise feels strangely comparable to among their rivals there’s a wealth of accessories you can get for the flexi spot desk as much as and consisting of a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our precious time covering different choices and accessories I might but I believe I’m better that they just sent a fundamental desk since as a fundamental desk I’m not a fan of the quality assurance at this price point and I do not believe slapping on a bunch of bonus is the relocation when the core product isn’t what it need to be they do provide a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years really desk is 5 years and uplift desk is 7 years if you are Union Flexispot
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and performance however I would invest the extra money it’s gon na require to enter into a higher end manufacturer like uplift desk or extremely desk and I haven’t personally utilized extremely desk products so I can’t speak on it but their credibility is very good big thanks to flexi spot for sending this out for review unfortunately I can not recommend this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with seeing as how both the desktop and the casters arrived harmed but from a client perspective you ‘d probably be really thrilled to get this in