today we’re taking a look at a motorized sit-stand desk…Loctek Flexispot Careers… you might have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was very positive.
It’s very easy to put together, and it took my 11-year-old daughter and I (I mainly just monitored) under an hour from start to finish.
It’s very sturdy and can hold a lot of weight. Inspect out the video below of it operating while there’s a person lying down on it if you don’t believe me.
The electric raise/lower feature is not only easy to use and quickly, but it’s also remarkably smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without providing it much thought.
On top of being functional, it likewise looks fantastic in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a display stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is also useful if your furry coworker likes to chew on or have fun with your cables.
Flexispot has options that are even more economical than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of functions that I wasn’t necessarily a huge fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how sturdy the Flexispot is.
The practical cable television tray was a bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the directions.
You will need to buy an anti-fatigue mat to stay comfy, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (given that this indicated it was going to be strong) and likewise a little hesitant (because we all know just how much of a challenge putting together furnishings can be).
Fortunately, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t described well in the directions.
Is it worth getting a standing desk?
When assembled, I like the streamlined appearance of this desk. I’m positive any of the many varied finishes that it comes in would look great in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of office.
The quiet operation and height memory settings make it simple, efficient, and quiet to switch between sitting and standing as lot of times as you desire throughout the day.
Finally, this desk is tough. It can hold up to 335 pounds even while in operation, so if you have a large desktop computer (or wish to take a nap on it for some reason) it has you covered. It will also equally distribute weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
because video is quite kitted out as the desk we’re taking a look at today is pretty standard I tried to get as close to that as I could on uplifts website with similar configurations the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is in fact 5 inches longer but you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for review however as you must understand by now doesn’t affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get doing not have even any cable grommets for travel through the outdoors container
for the desktop was not damaged in any way which is utterly unusual due to the fact that I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just very rough man if I had bought this I ‘d have been on the phone with client service right away they did likewise handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function unusually definitely where any kind of cable television management products whatsoever the frame on this unit is a single motor dual stage design versus the double motor three-stage design that comes requirement with the uplift desk this can be updated as well to both the double stage dual motor and a three-stage double motor which presses the expense of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this model does come standard with the control board that enables up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be slow is very quiet as in barely audible this outside a cost would be the one advantage I would give this unit over the uplift desk and I wish to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift model over 35% more affordable even if you update this flexi area test to the dual motor three-stage style it still comes in a hundred and seventy dollars more affordable than the uplift however cheaper does not imply low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that however the lateral stability of this desk the horizontal motion at this rate point it’s undesirable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is absolutely shocking to top things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those four casters got here damaged too my plan for this desk at this moment is to lose the desk top and included completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furnishings that will last you this at best seems like a more affordable imitation of that it just doesn’t feel quality and the difference in between this desk and my main desk is night and day do feel free to have a look at their site as well which also feels eerily comparable to one of their rivals there’s a wealth of devices you can get for the flexi spot desk approximately and consisting of a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our precious time covering different options and devices I might but I think I’m happier that they just sent a standard desk due to the fact that as a standard desk I’m not a fan of the quality control at this cost point and I do not believe slapping on a bunch of additionals is the move when the core item isn’t what it must be they do provide a 30-day trial if you’re just morbidly curious and they warranty their desks for three years very desk is five years and uplift desk is 7 years if you are Loctek Flexispot Careers
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to video gaming and performance but I would spend the additional money it’s gon na take to enter a higher end maker like uplift desk or really desk and I have not personally utilized extremely desk products so I can’t speak on it but their credibility is very good huge thanks to flexi spot for sending this out for review unfortunately I can not recommend this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with viewing as how both the desktop and the casters arrived damaged but from a customer viewpoint you ‘d probably be actually delighted to get this in