today we’re having a look at a motorized sit-stand desk…Ikea Flexispot… you may have seen my evaluation on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are a lot of things to love about the Flexispot E7. In general, my experience was extremely favorable.
It’s extremely simple to assemble, and it took my 11-year-old daughter and I (I primarily simply supervised) under an hour from start to finish.
It’s super tough and can hold a lot of weight. Check out the video below of it running while there’s an individual lying down on it if you do not think me.
The electrical raise/lower function is not only easy to use and quickly, but it’s also surprisingly smooth and peaceful.
You can set your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without offering it much thought.
On top of being functional, it likewise looks excellent in my workplace (I got the bamboo top desk).
The width is also adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a display stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is likewise practical if your furry colleague likes to chew on or have fun with your cables.
Flexispot has options that are much more affordable than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t always a substantial fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is just a consequence of how durable the Flexispot is.
The convenient cable tray was a bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the instructions.
You will need to purchase an anti-fatigue mat to stay comfy, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both excited (because this meant it was going to be durable) and likewise a little hesitant (since all of us know how much of an obstacle putting together furniture can be).
Thankfully, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
When assembled, I enjoy the smooth appearance of this desk. I’m positive any of the many diverse finishes that it can be found in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the smallest of office.
The peaceful operation and height memory settings make it easy, efficient, and peaceful to change in between sitting and standing as lot of times as you desire throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop (or wish to take a nap on it for some reason) it has you covered. It will also uniformly disperse weight no matter how unbalanced the weight you put on it is, it won’t wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is pretty basic I attempted to get as near that as I might on uplifts website with similar setups the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is actually five inches longer however you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review but as you should know by now doesn’t impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get lacking even any cable grommets for go through the outside carton
for the desktop was not harmed in any way which is absolutely strange since I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply very rough man if I had acquired this I ‘d have been on the phone with customer support immediately they did likewise handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function strangely definitely where any kind of cable management products whatsoever the frame on this unit is a single motor dual phase design versus the double motor three-stage design that comes requirement with the uplift desk this can be updated as well to both the double phase double motor and a three-stage dual motor which presses the expense of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this model does come standard with the control panel that permits up-and-down movement plus 3 memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a price would be the one advantage I would provide this unit over the uplift desk and I wish to take care here because this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift design over 35% more affordable even if you upgrade this flexi spot test to the double motor three-stage style it still is available in a hundred and seventy dollars cheaper than the uplift however cheaper does not suggest inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely offer it that but the lateral stability of this desk the horizontal movement at this rate point it’s unacceptable it’s add insult to injury here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the noise is absolutely infuriating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived damaged too my prepare for this desk at this moment is to lose the desk top and included completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furniture that will last you this at best feels like a cheaper replica of that it simply does not feel quality and the distinction in between this desk and my main desk is night and day do feel free to take a look at their site too which likewise feels strangely similar to one of their competitors there’s a wealth of accessories you can get for the flexi area desk approximately and including a foot massager and even a fixed exercise bike and I could invest another 10 minutes of our precious time covering various choices and devices I might but I believe I’m happier that they only sent out a basic desk since as a fundamental desk I’m not a fan of the quality control at this rate point and I do not believe slapping on a lot of additionals is the move when the core item isn’t what it need to be they do use a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years extremely desk is 5 years and uplift desk is seven years if you are Ikea Flexispot
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to video gaming and efficiency however I would spend the extra money it’s gon na require to enter into a higher end maker like uplift desk or very desk and I haven’t personally utilized very desk products so I can’t speak on it however their track record is very good big thanks to flexi area for sending this out for review regrettably I can not suggest this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with viewing as how both the desktop and the casters arrived damaged but from a client standpoint you ‘d most likely be really thrilled to get this in