today we’re having a look at a motorized sit-stand desk…Flexispot White Paper… you might have seen my review on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was extremely favorable.
It’s very easy to assemble, and it took my 11-year-old daughter and I (I primarily just monitored) under an hour from start to finish.
It’s super strong and can hold a lot of weight. Inspect out the video listed below of it operating while there’s a person lying down on it if you don’t believe me.
The electrical raise/lower function is not only easy to use and quick, but it’s likewise surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without giving it much idea.
On top of being practical, it also looks terrific in my office (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a monitor stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is likewise valuable if your furry coworker likes to chew on or have fun with your cables.
Flexispot has options that are much more inexpensive than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t always a big fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, however this is just a consequence of how sturdy the Flexispot is.
The practical cable tray was a bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the instructions.
You will require to buy an anti-fatigue mat to remain comfy, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both ecstatic (since this meant it was going to be strong) and likewise a little hesitant (because all of us know how much of an obstacle putting together furniture can be).
Luckily, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t described well in the guidelines.
Is it worth getting a standing desk?
As soon as put together, I like the smooth look of this desk. I’m confident any of the many diverse finishes that it comes in would look fantastic in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it easy, effective, and peaceful to change between sitting and standing as often times as you want throughout the day.
Last but not least, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a significant desktop (or want to take a nap on it for some reason) it has you covered. It will likewise uniformly disperse weight no matter how out of balance the weight you place on it is, it won’t wiggle or wobble.
in that video is pretty kitted out as the desk we’re looking at today is pretty fundamental I tried to get as near to that as I could on uplifts site with similar configurations the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is in fact five inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review but as you need to understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping till the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can possibly get doing not have even any cable grommets for travel through the outside container
for the desktop was not harmed in any way which is absolutely strange due to the fact that I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just very rough man if I had purchased this I ‘d have been on the phone with customer care instantly they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each component to support motorized function unusually definitely where any kind of cable management products whatsoever the frame on this unit is a single motor double phase design versus the dual motor three-stage design that comes standard with the uplift desk this can be upgraded also to both the dual phase double motor and a three-stage dual motor which pushes the cost of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than high enough even for me and I stay at 6 foot for this design does come standard with the control board that enables up-and-down movement plus three memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is very peaceful as in barely audible this outside a rate would be the one advantage I would give this unit over the uplift desk and I wish to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift model over 35% cheaper even if you update this flexi area test to the double motor three-stage design it still comes in a hundred and seventy dollars cheaper than the uplift but cheaper doesn’t mean cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely provide it that but the lateral stability of this desk the horizontal motion at this cost point it’s unacceptable it’s add fuel to the fire here they include a little safety baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the noise and this baffle is definitely frustrating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here harmed too my plan for this desk at this point is to lose the desk top and featured entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furniture that will last you this at best feels like a less expensive replica of that it simply does not feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to take a look at their website too which also feels strangely similar to among their rivals there’s a wealth of accessories you can get for the flexi spot desk up to and including a foot massager and even a fixed exercise bike and I could invest another 10 minutes of our valuable time covering different choices and accessories I might but I think I’m happier that they just sent out a basic desk because as a standard desk I’m not a fan of the quality assurance at this cost point and I do not believe slapping on a bunch of additionals is the relocation when the core product isn’t what it ought to be they do offer a 30-day trial if you’re simply morbidly curious and they guarantee their desks for 3 years extremely desk is five years and uplift desk is 7 years if you are Flexispot White Paper
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of gaming and performance however I would spend the additional money it’s gon na take to enter into a higher end maker like uplift desk or really desk and I haven’t personally used really desk items so I can’t speak on it but their reputation is great huge thanks to flexi area for sending this out for evaluation sadly I can not advise this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with seeing as how both the desktop and the casters arrived damaged but from a consumer perspective you ‘d probably be really thrilled to get this in