today we’re taking a look at a motorized sit-stand desk…Flexispot Support… you might have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was extremely positive.
It’s very simple to put together, and it took my 11-year-old daughter and I (I mostly just supervised) under an hour from start to finish.
It’s extremely tough and can hold a lot of weight. If you don’t think me, check out the video below of it running while there’s a person resting on it.
The electric raise/lower feature is not only easy to use and quick, but it’s likewise remarkably smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to switch in between the two without providing it much thought.
On top of being functional, it likewise looks terrific in my office (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a monitor stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise helpful if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has alternatives that are far more budget-friendly than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t necessarily a big fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, however this is just an effect of how tough the Flexispot is.
The convenient cable television tray was a bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will need to buy an anti-fatigue mat to stay comfy, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both excited (given that this meant it was going to be sturdy) and likewise a little reluctant (because we all understand just how much of a challenge assembling furniture can be).
The good news is, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t explained well in the instructions.
Is it worth getting a standing desk?
As soon as assembled, I like the sleek appearance of this desk. I’m positive any of the many varied surfaces that it is available in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the smallest of office.
The peaceful operation and height memory settings make it simple, effective, and quiet to switch in between sitting and standing as sometimes as you want throughout the day.
This desk is strong. It can hold up to 335 lbs even while in operation, so if you have a significant desktop (or want to rest on it for some reason) it has you covered. It will also evenly disperse weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
in that video is quite kitted out as the desk we’re looking at today is pretty basic I tried to get as near that as I could on uplifts website with comparable setups the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is actually five inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for evaluation but as you must understand by now does not affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get lacking even any cable grommets for travel through the outside carton
for the desktop was not damaged in any way which is absolutely strange because I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply super rough guy if I had purchased this I ‘d have been on the phone with client service right away they did likewise handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function strangely absolutely where any type of cable television management products whatsoever the frame on this system is a single motor dual phase design versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded as well to both the dual stage dual motor and a three-stage dual motor which pushes the expense of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this model does come standard with the control board that permits up-and-down movement plus three memory spots with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is very peaceful as in barely audible this outside a rate would be the one benefit I would offer this system over the uplift desk and I wish to be careful here because this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift design over 35% more affordable even if you upgrade this flexi area test to the double motor three-stage design it still comes in a hundred and seventy dollars cheaper than the uplift however cheaper does not mean cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that but the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s rub salt in the wound here they include a little safety baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the noise is definitely shocking to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters arrived harmed too my prepare for this desk at this moment is to lose the desk top and included completely and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to film items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality workplace furnishings that will last you this at best feels like a less expensive replica of that it just does not feel quality and the distinction in between this desk and my primary desk is night and day do feel free to check out their website also which also feels strangely comparable to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk as much as and consisting of a foot massager and even a stationary exercise bike and I could invest another 10 minutes of our precious time covering various options and devices I could but I believe I’m happier that they only sent out a standard desk because as a basic desk I’m not a fan of the quality control at this cost point and I don’t believe slapping on a lot of bonus is the relocation when the core item isn’t what it must be they do provide a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years extremely desk is five years and uplift desk is 7 years if you are Flexispot Support
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of video gaming and performance however I would spend the money it’s gon na require to get into a higher end manufacturer like uplift desk or really desk and I have not personally utilized very desk items so I can’t speak on it however their credibility is very good big thanks to flexi spot for sending this out for review unfortunately I can not recommend this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with seeing as how both the desktop and the casters got here damaged but from a customer viewpoint you ‘d probably be truly thrilled to get this in