today we’re taking a look at a motorized sit-stand desk…Flexispot Standing Desk Vs Autonomous… you might have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was extremely positive.
It’s extremely simple to put together, and it took my 11-year-old daughter and I (I mainly simply supervised) under an hour from start to finish.
It’s incredibly durable and can hold a lot of weight. Inspect out the video below of it running while there’s an individual lying down on it if you don’t believe me.
The electric raise/lower feature is not just easy to use and fast, however it’s likewise remarkably smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without giving it much thought.
On top of being functional, it also looks great in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a monitor stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise helpful if your furry coworker likes to chew on or play with your cables.
Flexispot has alternatives that are much more inexpensive than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few functions that I wasn’t necessarily a substantial fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how sturdy the Flexispot is.
The hassle-free cable television tray was a bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the instructions.
You will require to buy an anti-fatigue mat to stay comfy, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (since this indicated it was going to be tough) and also a little hesitant (since we all know just how much of a difficulty assembling furniture can be).
The good news is, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t discussed well in the directions.
Is it worth getting a standing desk?
Once put together, I like the smooth look of this desk. I’m confident any of the many diverse surfaces that it is available in would look great in any workplace, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, effective, and quiet to switch in between sitting and standing as lot of times as you desire throughout the day.
This desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop (or want to sleep on it for some reason) it has you covered. It will likewise uniformly disperse weight no matter how unbalanced the weight you place on it is, it won’t wiggle or wobble.
because video is pretty kitted out as the desk we’re looking at today is pretty fundamental I tried to get as close to that as I might on uplifts website with comparable setups the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is actually 5 inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for review but as you should understand by now doesn’t impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can possibly get lacking even any cable grommets for go through the outside carton
for the desktop was not harmed in any way which is absolutely strange because I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply super rough guy if I had purchased this I ‘d have been on the phone with customer support right away they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function strangely definitely where any kind of cable management products whatsoever the frame on this system is a single motor dual stage style versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded too to both the double stage dual motor and a three-stage double motor which presses the expense of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this design does come standard with the control board that allows for up-and-down movement plus 3 memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be slow is extremely quiet as in barely audible this outside a cost would be the one benefit I would provide this system over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift model over 35% more affordable even if you update this flexi area test to the double motor three-stage style it still is available in a hundred and seventy dollars cheaper than the uplift but less expensive does not suggest inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that but the lateral stability of this desk the horizontal movement at this rate point it’s unacceptable it’s add insult to injury here they include a little safety baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the noise and this baffle is absolutely shocking to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived harmed also my prepare for this desk at this point is to lose the desk top and featured completely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to film items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality office furnishings that will last you this at finest seems like a cheaper imitation of that it just does not feel quality and the difference between this desk and my main desk is night and day do feel free to check out their site also which also feels eerily comparable to among their rivals there’s a wealth of devices you can get for the flexi area desk as much as and consisting of a foot massager and even a stationary stationary bicycle and I might invest another 10 minutes of our valuable time covering different options and devices I could however I think I’m happier that they only sent a fundamental desk due to the fact that as a standard desk I’m not a fan of the quality assurance at this rate point and I don’t believe slapping on a bunch of additionals is the move when the core product isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years very desk is 5 years and uplift desk is seven years if you are Flexispot Standing Desk Vs Autonomous
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and performance but I would spend the extra money it’s gon na take to enter a higher end producer like uplift desk or really desk and I haven’t personally used very desk items so I can’t speak on it but their track record is excellent huge thanks to flexi area for sending this out for review sadly I can not advise this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with seeing as how both the desktop and the casters arrived harmed but from a consumer viewpoint you ‘d most likely be really delighted to get this in