today we’re taking a look at a motorized sit-stand desk…Flexispot Standing Desk E1… you may have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was really favorable.
It’s very easy to put together, and it took my 11-year-old daughter and I (I mainly just supervised) under an hour from start to finish.
It’s super durable and can hold a great deal of weight. If you don’t think me, take a look at the video below of it running while there’s an individual resting on it.
The electrical raise/lower feature is not just easy to use and fast, but it’s also remarkably smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to change in between the two without offering it much thought.
On top of being functional, it also looks fantastic in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a screen stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is also valuable if your furry coworker likes to chew on or play with your cables.
Flexispot has alternatives that are even more budget-friendly than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few features that I wasn’t always a huge fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how tough the Flexispot is.
The practical cable television tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the directions.
You will need to buy an anti-fatigue mat to stay comfortable, but this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (considering that this indicated it was going to be durable) and also a little reluctant (since all of us know how much of a difficulty assembling furnishings can be).
Fortunately, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
Once assembled, I enjoy the smooth appearance of this desk. I’m confident any of the many diverse finishes that it is available in would look fantastic in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, efficient, and peaceful to change in between sitting and standing as many times as you want throughout the day.
This desk is strong. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop computer (or want to rest on it for some reason) it has you covered. It will also equally distribute weight no matter how unbalanced the weight you put on it is, it won’t wiggle or wobble.
in that video is quite kitted out as the desk we’re taking a look at today is quite basic I attempted to get as near that as I might on uplifts website with equivalent configurations the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is actually five inches longer however you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for evaluation however as you should know by now does not affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can potentially get lacking even any cable grommets for pass through the outside container
for the desktop was not damaged in any way which is utterly strange due to the fact that I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply super rough man if I had purchased this I ‘d have been on the phone with customer care instantly they did likewise handled to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function unusually absolutely where any kind of cable television management products whatsoever the frame on this unit is a single motor dual stage design versus the double motor three-stage design that comes standard with the uplift desk this can be updated too to both the double phase double motor and a three-stage dual motor which presses the cost of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this design does come standard with the control panel that enables up-and-down motion plus 3 memory areas with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is extremely quiet as in barely audible this outside a price would be the one benefit I would offer this system over the uplift desk and I want to take care here because this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift model over 35% cheaper even if you upgrade this flexi spot test to the double motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift but more affordable does not indicate cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that however the lateral stability of this desk the horizontal movement at this rate point it’s undesirable it’s rub salt in the wound here they consist of a little security baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is definitely frustrating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those four casters got here damaged as well my prepare for this desk at this point is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furnishings that will last you this at best feels like a more affordable imitation of that it just does not feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to have a look at their site too which also feels strangely comparable to among their competitors there’s a wealth of devices you can get for the flexi spot desk approximately and including a foot massager and even a stationary exercise bike and I could invest another 10 minutes of our precious time covering different choices and accessories I might but I believe I’m better that they just sent out a basic desk since as a fundamental desk I’m not a fan of the quality control at this rate point and I do not believe slapping on a bunch of bonus is the move when the core product isn’t what it must be they do use a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years very desk is five years and uplift desk is 7 years if you are Flexispot Standing Desk E1
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to gaming and efficiency but I would invest the extra money it’s gon na take to enter a higher end manufacturer like uplift desk or extremely desk and I haven’t personally used extremely desk items so I can’t speak on it however their track record is very good huge thanks to flexi area for sending this out for evaluation unfortunately I can not advise this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with seeing as how both the desktop and the casters arrived damaged but from a client standpoint you ‘d most likely be actually thrilled to get this in