today we’re having a look at a motorized sit-stand desk…Flexispot Standing Desk Bamboo… you may have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s really easy to assemble, and it took my 11-year-old child and I (I primarily simply monitored) under an hour from start to finish.
It’s extremely tough and can hold a great deal of weight. If you do not believe me, check out the video below of it running while there’s an individual resting on it.
The electrical raise/lower function is not just easy to use and quickly, however it’s likewise remarkably smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without giving it much idea.
On top of being functional, it likewise looks great in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a display stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is likewise handy if your furry coworker likes to chew on or play with your cables.
Flexispot has alternatives that are much more budget friendly than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of functions that I wasn’t always a substantial fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how tough the Flexispot is.
The practical cable tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the instructions.
You will require to buy an anti-fatigue mat to stay comfy, but this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (since this implied it was going to be durable) and likewise a little reluctant (since we all know how much of a difficulty assembling furnishings can be).
Thankfully, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
When assembled, I like the sleek appearance of this desk. I’m confident any of the many diverse finishes that it comes in would look terrific in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it easy, effective, and peaceful to change in between sitting and standing as lot of times as you want throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a significant desktop (or wish to take a nap on it for some reason) it has you covered. It will also evenly distribute weight no matter how out of balance the weight you put on it is, it will not wobble or wiggle.
in that video is quite kitted out as the desk we’re taking a look at today is quite fundamental I attempted to get as near that as I could on uplifts site with equivalent setups the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is actually five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation but as you must understand by now does not affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering till the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can perhaps get lacking even any cable television grommets for pass through the outdoors carton
for the desktop was not harmed in any way which is entirely unusual since I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply super rough guy if I had actually bought this I ‘d have been on the phone with customer care immediately they did likewise handled to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function strangely definitely where any type of cable management materials whatsoever the frame on this unit is a single motor double phase design versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded too to both the double phase dual motor and a three-stage double motor which presses the cost of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this design does come basic with the control panel that enables up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is extremely peaceful as in barely audible this outside a price would be the one advantage I would offer this unit over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift design over 35% less expensive even if you upgrade this flexi spot test to the dual motor three-stage style it still can be found in a hundred and seventy dollars cheaper than the uplift but cheaper doesn’t indicate low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly provide it that but the lateral stability of this desk the horizontal movement at this cost point it’s undesirable it’s add fuel to the fire here they include a little security baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is absolutely infuriating to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here damaged too my plan for this desk at this moment is to lose the desk top and included all together and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furniture that will last you this at finest feels like a less expensive replica of that it just does not feel quality and the distinction between this desk and my primary desk is night and day do feel free to have a look at their website also which likewise feels strangely similar to one of their rivals there’s a wealth of accessories you can get for the flexi area desk approximately and including a foot massager and even a fixed stationary bicycle and I might spend another 10 minutes of our precious time covering different options and devices I could however I think I’m happier that they just sent out a fundamental desk since as a standard desk I’m not a fan of the quality control at this cost point and I don’t believe slapping on a lot of extras is the move when the core item isn’t what it must be they do offer a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years very desk is 5 years and uplift desk is 7 years if you are Flexispot Standing Desk Bamboo
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of video gaming and productivity but I would invest the money it’s gon na take to enter into a higher end producer like uplift desk or very desk and I have not personally used very desk items so I can’t speak on it but their reputation is excellent big thanks to flexi spot for sending this out for evaluation unfortunately I can not advise this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with seeing as how both the desktop and the casters arrived damaged but from a consumer viewpoint you ‘d probably be really excited to get this in