today we’re having a look at a motorized sit-stand desk…Flexispot Standing Desk 55 Inch… you may have seen my evaluation on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was really positive.
It’s really easy to put together, and it took my 11-year-old child and I (I primarily just monitored) under an hour from start to finish.
It’s super strong and can hold a great deal of weight. Check out the video below of it running while there’s an individual lying down on it if you do not think me.
The electrical raise/lower function is not just easy to use and quick, however it’s likewise surprisingly smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without providing it much thought.
On top of being practical, it also looks great in my office (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a screen stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also helpful if your furry colleague likes to chew on or play with your cables.
Flexispot has choices that are much more economical than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few features that I wasn’t necessarily a substantial fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how durable the Flexispot is.
The practical cable television tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will require to buy an anti-fatigue mat to remain comfy, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (considering that this suggested it was going to be sturdy) and also a little hesitant (because we all understand just how much of an obstacle assembling furnishings can be).
The good news is, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t explained well in the directions.
Is it worth getting a standing desk?
As soon as put together, I like the sleek look of this desk. I’m confident any of the many diverse finishes that it can be found in would look fantastic in any office, and the adjustable width makes it easy to fit it in even the tiniest of office.
The quiet operation and height memory settings make it easy, effective, and quiet to change between sitting and standing as often times as you desire throughout the day.
Last but not least, this desk is tough. It can hold up to 335 pounds even while in operation, so if you have a large desktop (or want to sleep on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how unbalanced the weight you put on it is, it will not wobble or wiggle.
in that video is quite kitted out as the desk we’re taking a look at today is pretty basic I attempted to get as near to that as I could on uplifts website with comparable configurations the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is really five inches longer however you can do a lot with five inches boom yes now for openness flexi area did send this desk out for evaluation but as you ought to know by now does not affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get lacking even any cable television grommets for travel through the outside carton
for the desktop was not harmed in any way which is entirely strange due to the fact that I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just very rough male if I had actually purchased this I ‘d have been on the phone with customer care immediately they did likewise managed to miss drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function strangely absolutely where any type of cable television management products whatsoever the frame on this system is a single motor double phase design versus the dual motor three-stage design that comes standard with the uplift desk this can be upgraded as well to both the double stage dual motor and a three-stage double motor which presses the expense of the desk up
an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this model does come standard with the control board that enables up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be slow is really peaceful as in barely audible this outside a price would be the one advantage I would give this system over the uplift desk and I want to beware here since this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift design over 35% cheaper even if you update this flexi area test to the double motor three-stage style it still is available in a hundred and seventy dollars cheaper than the uplift however cheaper doesn’t indicate inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely offer it that however the lateral stability of this desk the horizontal motion at this rate point it’s inappropriate it’s add fuel to the fire here they consist of a little security baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is definitely infuriating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those four casters showed up damaged also my plan for this desk at this moment is to lose the desk top and featured all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality office furniture that will last you this at finest seems like a more affordable replica of that it simply doesn’t feel quality and the difference in between this desk and my primary desk is night and day do do not hesitate to take a look at their site too which also feels strangely comparable to one of their rivals there’s a wealth of devices you can get for the flexi spot desk up to and including a foot massager and even a stationary stationary bicycle and I might invest another 10 minutes of our precious time covering numerous alternatives and devices I could but I believe I’m better that they only sent out a basic desk due to the fact that as a basic desk I’m not a fan of the quality assurance at this rate point and I don’t think slapping on a lot of bonus is the move when the core item isn’t what it ought to be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years very desk is five years and uplift desk is seven years if you are Flexispot Standing Desk 55 Inch
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of video gaming and performance but I would spend the money it’s gon na require to enter a greater end maker like uplift desk or really desk and I have not personally used extremely desk items so I can’t speak on it but their credibility is great big thanks to flexi spot for sending this out for review sadly I can not recommend this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with viewing as how both the desktop and the casters showed up damaged however from a customer standpoint you ‘d most likely be actually excited to get this in