today we’re taking a look at a motorized sit-stand desk…Flexispot Quick Install Standing Desk… you might have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was extremely positive.
It’s extremely simple to put together, and it took my 11-year-old child and I (I mostly just monitored) under an hour from start to finish.
It’s incredibly strong and can hold a lot of weight. If you don’t believe me, check out the video listed below of it operating while there’s a person lying down on it.
The electric raise/lower function is not just easy to use and quick, however it’s also surprisingly smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without providing it much idea.
On top of being functional, it likewise looks great in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a screen stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is also useful if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has options that are even more cost effective than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t always a big fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, but this is simply an effect of how strong the Flexispot is.
The convenient cable television tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the instructions.
You will need to purchase an anti-fatigue mat to remain comfy, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (because this implied it was going to be sturdy) and likewise a little hesitant (because we all understand just how much of a challenge putting together furnishings can be).
The good news is, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t described well in the guidelines.
Is it worth getting a standing desk?
As soon as put together, I love the sleek look of this desk. I’m positive any of the many diverse finishes that it comes in would look great in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The peaceful operation and height memory settings make it simple, effective, and quiet to switch between sitting and standing as many times as you want throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a substantial home computer (or want to take a nap on it for some reason) it has you covered. It will also evenly distribute weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is quite standard I tried to get as near that as I might on uplifts website with similar configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is really five inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for review but as you should understand by now does not impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can potentially get lacking even any cable grommets for pass through the outdoors carton
for the desktop was not damaged in any way which is absolutely unusual due to the fact that I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply incredibly rough male if I had bought this I ‘d have been on the phone with client service right away they did likewise handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function strangely absolutely where any kind of cable television management products whatsoever the frame on this system is a single motor double phase design versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded too to both the double phase dual motor and a three-stage double motor which pushes the expense of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this design does come standard with the control board that permits up-and-down motion plus 3 memory areas with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a rate would be the one benefit I would provide this unit over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift model over 35% less expensive even if you update this flexi spot test to the double motor three-stage style it still comes in a hundred and seventy dollars less expensive than the uplift however more affordable doesn’t imply cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely provide it that however the lateral stability of this desk the horizontal movement at this cost point it’s undesirable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is absolutely shocking to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here harmed too my prepare for this desk at this point is to lose the desk top and came with all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furnishings that will last you this at best feels like a more affordable imitation of that it just does not feel quality and the difference between this desk and my main desk is night and day do do not hesitate to take a look at their site as well which also feels eerily similar to one of their competitors there’s a wealth of devices you can get for the flexi area desk up to and including a foot massager and even a fixed stationary bicycle and I might invest another 10 minutes of our precious time covering numerous options and devices I might however I believe I’m better that they just sent out a standard desk since as a standard desk I’m not a fan of the quality assurance at this rate point and I don’t believe slapping on a lot of extras is the relocation when the core product isn’t what it should be they do provide a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years extremely desk is five years and uplift desk is seven years if you are Flexispot Quick Install Standing Desk
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of gaming and efficiency but I would invest the extra money it’s gon na take to enter a higher end manufacturer like uplift desk or very desk and I have not personally utilized very desk items so I can’t speak on it but their track record is excellent huge thanks to flexi spot for sending this out for review regrettably I can not advise this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with viewing as how both the desktop and the casters got here damaged but from a client standpoint you ‘d most likely be truly delighted to get this in