Find Flexispot Pro Series E7 2022

today we’re taking a look at a motorized sit-stand desk…Flexispot Pro Series E7… you may have seen my evaluation on the uplift desk, if not …

In general, I should state I like the Flexispot E7.

here are lots of things to love about the Flexispot E7. In general, my experience was very favorable.

It’s extremely simple to assemble, and it took my 11-year-old child and I (I mainly simply monitored) under an hour from start to finish.
It’s very sturdy and can hold a lot of weight. Check out the video below of it operating while there’s a person lying down on it if you don’t believe me.

The electrical raise/lower function is not just easy to use and fast, however it’s also remarkably smooth and peaceful.
You can set your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without providing it much thought.
On top of being functional, it likewise looks excellent in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also practical if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has alternatives that are far more economical than numerous other desks like it.
Flexispot Standing Desk Review – Cons

Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of functions that I wasn’t necessarily a big fan of:

The package that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how strong the Flexispot is.
The convenient cable tray was a bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the instructions.
You will require to purchase an anti-fatigue mat to remain comfy, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.

When it showed up and I saw how heavy it was, I was both ecstatic (since this implied it was going to be sturdy) and also a little reluctant (due to the fact that we all understand just how much of a difficulty putting together furniture can be).

Luckily, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t described well in the directions.

As soon as assembled, I love the streamlined appearance of this desk. I’m confident any of the many diverse finishes that it comes in would look great in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.

The peaceful operation and height memory settings make it easy, effective, and peaceful to change between sitting and standing as sometimes as you want throughout the day.

Finally, this desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a significant desktop (or want to sleep on it for some reason) it has you covered. It will also equally disperse weight no matter how unbalanced the weight you put on it is, it will not wobble or wiggle.

 

in that video is quite kitted out as the desk we’re taking a look at today is pretty standard I attempted to get as close to that as I might on uplifts website with equivalent setups the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is really five inches longer however you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for review but as you should understand by now does not impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get lacking even any cable grommets for pass through the outdoors container

for the desktop was not damaged in any way which is utterly strange due to the fact that I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just super rough guy if I had actually bought this I ‘d have been on the phone with client service instantly they did likewise managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact quite straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function oddly absolutely where any type of cable management products whatsoever the frame on this unit is a single motor dual phase design versus the dual motor three-stage design that comes standard with the uplift desk this can be upgraded also to both the double phase double motor and a three-stage double motor which pushes the expense of the desk up

an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this model does come standard with the control board that permits up-and-down movement plus three memory spots with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a cost would be the one advantage I would provide this system over the uplift desk and I wish to beware here because this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% cheaper even if you upgrade this flexi area test to the double motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift however cheaper doesn’t mean inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly give it that but the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s rub salt in the wound here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when

this desk sees any lateral movement at all the drive shaft strikes this baffle and the sound is definitely shocking to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived harmed as well my plan for this desk at this moment is to lose the desk top and included completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality office furniture that will last you this at best feels like a more affordable imitation of that it simply doesn’t feel quality and the difference in between this desk and my main desk is night and day do feel free to check out their website also which also feels eerily similar to among their rivals there’s a wealth of accessories you can get for the flexi spot desk approximately and including a foot massager and even a stationary stationary bicycle and I might spend another 10 minutes of our precious time covering various alternatives and devices I might however I think I’m happier that they only sent out a fundamental desk due to the fact that as a standard desk I’m not a fan of the quality assurance at this price point and I do not believe slapping on a lot of bonus is the move when the core product isn’t what it need to be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years very desk is 5 years and uplift desk is 7 years if you are Flexispot Pro Series E7

in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of gaming and performance but I would spend the extra money it’s gon na require to enter into a greater end producer like uplift desk or extremely desk and I haven’t personally used very desk products so I can’t speak on it but their track record is excellent big thanks to flexi spot for sending this out for evaluation regrettably I can not recommend this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with seeing as how both the desktop and the casters arrived harmed but from a customer viewpoint you ‘d most likely be really delighted to get this in

Published