today we’re having a look at a motorized sit-stand desk…Flexispot M3 – 47… you may have seen my review on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was extremely positive.
It’s very simple to put together, and it took my 11-year-old daughter and I (I mostly just supervised) under an hour from start to finish.
It’s incredibly sturdy and can hold a lot of weight. Examine out the video listed below of it running while there’s a person lying down on it if you don’t believe me.
The electric raise/lower feature is not only easy to use and fast, however it’s also surprisingly smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to switch between the two without giving it much idea.
On top of being practical, it likewise looks fantastic in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a screen stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is likewise practical if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has options that are even more inexpensive than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t always a huge fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply an effect of how sturdy the Flexispot is.
The practical cable tray was a little bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the guidelines.
You will need to purchase an anti-fatigue mat to remain comfy, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (because this suggested it was going to be tough) and likewise a little hesitant (because we all know just how much of a difficulty assembling furniture can be).
The good news is, with the help of an educational YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
When put together, I enjoy the streamlined look of this desk. I’m confident any of the many diverse surfaces that it is available in would look fantastic in any office, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, efficient, and quiet to switch between sitting and standing as sometimes as you want throughout the day.
This desk is tough. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop (or wish to rest on it for some reason) it has you covered. It will also uniformly distribute weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
in that video is pretty kitted out as the desk we’re taking a look at today is quite standard I attempted to get as near that as I could on uplifts site with equivalent configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is really 5 inches longer but you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for review but as you need to know by now does not impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get lacking even any cable grommets for pass through the outside carton
for the desktop was not damaged in any way which is entirely unusual due to the fact that I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just incredibly rough guy if I had purchased this I ‘d have been on the phone with customer care instantly they did likewise handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function oddly absolutely where any type of cable television management products whatsoever the frame on this unit is a single motor double phase design versus the dual motor three-stage design that comes standard with the uplift desk this can be updated also to both the double stage dual motor and a three-stage double motor which pushes the cost of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this model does come standard with the control board that allows for up-and-down movement plus three memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a cost would be the one benefit I would give this unit over the uplift desk and I wish to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift design over 35% cheaper even if you update this flexi spot test to the double motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift but less expensive doesn’t suggest cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely give it that however the lateral stability of this desk the horizontal motion at this cost point it’s unacceptable it’s add insult to injury here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the noise is definitely frustrating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those four casters arrived damaged as well my prepare for this desk at this moment is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furniture that will last you this at finest seems like a more affordable replica of that it just does not feel quality and the difference between this desk and my main desk is night and day do do not hesitate to take a look at their website too which also feels strangely comparable to among their rivals there’s a wealth of devices you can get for the flexi area desk as much as and including a foot massager and even a stationary stationary bicycle and I might spend another 10 minutes of our precious time covering numerous alternatives and devices I could but I think I’m better that they only sent out a basic desk because as a fundamental desk I’m not a fan of the quality assurance at this rate point and I don’t believe slapping on a bunch of extras is the relocation when the core item isn’t what it need to be they do offer a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years really desk is five years and uplift desk is seven years if you are Flexispot M3 – 47
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and productivity however I would spend the extra money it’s gon na require to enter a higher end maker like uplift desk or really desk and I have not personally utilized really desk items so I can’t speak on it however their reputation is great big thanks to flexi spot for sending this out for evaluation sadly I can not advise this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with seeing as how both the desktop and the casters got here damaged but from a customer standpoint you ‘d most likely be actually excited to get this in