today we’re having a look at a motorized sit-stand desk…Flexispot Linkedin… you may have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s really easy to put together, and it took my 11-year-old daughter and I (I mostly just monitored) under an hour from start to finish.
It’s extremely sturdy and can hold a lot of weight. Inspect out the video below of it operating while there’s a person lying down on it if you don’t think me.
The electrical raise/lower function is not just easy to use and quickly, however it’s likewise remarkably smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without giving it much idea.
On top of being functional, it also looks fantastic in my office (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a display stand to your workstation).
The cable tray keeps all of those charging cables organized, which is likewise useful if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has options that are much more affordable than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t necessarily a huge fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, but this is simply an effect of how strong the Flexispot is.
The convenient cable television tray was a little bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will require to buy an anti-fatigue mat to remain comfortable, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (since this meant it was going to be sturdy) and likewise a little hesitant (due to the fact that all of us understand just how much of a difficulty assembling furnishings can be).
The good news is, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the directions.
Is it worth getting a standing desk?
As soon as assembled, I enjoy the streamlined appearance of this desk. I’m positive any of the many varied finishes that it can be found in would look great in any office, and the adjustable width makes it easy to fit it in even the tiniest of office.
The quiet operation and height memory settings make it simple, effective, and quiet to change in between sitting and standing as sometimes as you want throughout the day.
Last but not least, this desk is durable. It can hold up to 335 lbs even while in operation, so if you have a significant desktop (or want to take a nap on it for some reason) it has you covered. It will also uniformly disperse weight no matter how out of balance the weight you place on it is, it won’t wiggle or wobble.
in that video is pretty kitted out as the desk we’re looking at today is pretty standard I tried to get as close to that as I could on uplifts website with comparable setups the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is really 5 inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for evaluation but as you must understand by now doesn’t affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get doing not have even any cable grommets for travel through the outside container
for the desktop was not damaged in any way which is utterly strange because I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply incredibly rough male if I had bought this I ‘d have been on the phone with customer support immediately they did likewise handled to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function oddly absolutely where any kind of cable television management products whatsoever the frame on this unit is a single motor dual stage style versus the double motor three-stage design that comes standard with the uplift desk this can be upgraded too to both the dual phase dual motor and a three-stage double motor which presses the cost of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this model does come standard with the control board that permits up-and-down motion plus 3 memory spots with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is very quiet as in barely audible this outside a cost would be the one benefit I would provide this system over the uplift desk and I want to beware here since this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift design over 35% cheaper even if you update this flexi spot test to the double motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift however more affordable doesn’t imply low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely give it that however the lateral stability of this desk the horizontal movement at this cost point it’s unacceptable it’s rub salt in the wound here they include a little security baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is absolutely shocking to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here harmed too my prepare for this desk at this point is to lose the desk top and featured all together and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to movie items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality office furnishings that will last you this at finest feels like a cheaper imitation of that it simply doesn’t feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to take a look at their site also which likewise feels eerily similar to among their competitors there’s a wealth of accessories you can get for the flexi spot desk approximately and consisting of a foot massager and even a stationary stationary bicycle and I might spend another 10 minutes of our precious time covering numerous alternatives and accessories I could but I believe I’m happier that they only sent a standard desk since as a standard desk I’m not a fan of the quality assurance at this price point and I do not believe slapping on a lot of extras is the move when the core product isn’t what it need to be they do provide a 30-day trial if you’re simply morbidly curious and they guarantee their desks for 3 years really desk is 5 years and uplift desk is seven years if you are Flexispot Linkedin
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and performance but I would invest the extra money it’s gon na require to enter a higher end maker like uplift desk or very desk and I have not personally used really desk items so I can’t speak on it but their track record is great huge thanks to flexi spot for sending this out for evaluation regrettably I can not advise this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with viewing as how both the desktop and the casters got here harmed however from a consumer perspective you ‘d most likely be actually delighted to get this in