today we’re taking a look at a motorized sit-stand desk…Flexispot Kana Review… you may have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are a lot of things to love about the Flexispot E7. In general, my experience was very positive.
It’s extremely easy to assemble, and it took my 11-year-old daughter and I (I mainly simply supervised) under an hour from start to finish.
It’s super strong and can hold a lot of weight. If you don’t think me, take a look at the video below of it running while there’s an individual lying down on it.
The electric raise/lower feature is not only easy to use and quickly, but it’s likewise surprisingly smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without offering it much thought.
On top of being practical, it also looks fantastic in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a display stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also useful if your furry coworker likes to chew on or have fun with your cables.
Flexispot has alternatives that are much more inexpensive than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t necessarily a substantial fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how durable the Flexispot is.
The hassle-free cable television tray was a little bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will need to buy an anti-fatigue mat to stay comfy, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (because this suggested it was going to be tough) and also a little hesitant (since we all understand how much of a difficulty assembling furniture can be).
Luckily, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
Once assembled, I like the streamlined look of this desk. I’m confident any of the many varied surfaces that it comes in would look terrific in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it simple, effective, and peaceful to change between sitting and standing as often times as you desire throughout the day.
This desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop (or want to sleep on it for some reason) it has you covered. It will likewise uniformly disperse weight no matter how out of balance the weight you put on it is, it won’t wiggle or wobble.
in that video is quite kitted out as the desk we’re looking at today is quite fundamental I attempted to get as near to that as I might on uplifts site with comparable configurations the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is in fact 5 inches longer however you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for evaluation however as you must know by now doesn’t affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can possibly get lacking even any cable television grommets for travel through the outside container
for the desktop was not harmed in any way which is absolutely unusual because I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply very rough male if I had actually purchased this I ‘d have been on the phone with customer service immediately they did likewise handled to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function oddly absolutely where any sort of cable management materials whatsoever the frame on this system is a single motor dual stage design versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded too to both the dual stage dual motor and a three-stage dual motor which pushes the expense of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this model does come standard with the control board that allows for up-and-down movement plus 3 memory spots with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is extremely quiet as in barely audible this outside a price would be the one advantage I would offer this system over the uplift desk and I wish to beware here because this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift model over 35% less expensive even if you upgrade this flexi area test to the dual motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift but more affordable does not imply inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely offer it that however the lateral stability of this desk the horizontal motion at this cost point it’s inappropriate it’s add fuel to the fire here they consist of a little security baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the noise and this baffle is definitely frustrating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters got here harmed also my prepare for this desk at this moment is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furniture that will last you this at best feels like a less expensive replica of that it just doesn’t feel quality and the distinction in between this desk and my primary desk is night and day do feel free to take a look at their site too which likewise feels eerily comparable to one of their rivals there’s a wealth of devices you can get for the flexi spot desk approximately and consisting of a foot massager and even a stationary stationary bicycle and I might spend another 10 minutes of our precious time covering numerous options and devices I could however I believe I’m better that they just sent a fundamental desk due to the fact that as a fundamental desk I’m not a fan of the quality assurance at this rate point and I do not believe slapping on a lot of additionals is the relocation when the core item isn’t what it ought to be they do provide a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years extremely desk is five years and uplift desk is 7 years if you are Flexispot Kana Review
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to gaming and efficiency but I would invest the money it’s gon na take to enter a higher end manufacturer like uplift desk or extremely desk and I haven’t personally utilized extremely desk products so I can’t speak on it however their credibility is very good huge thanks to flexi spot for sending this out for evaluation regrettably I can not advise this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with viewing as how both the desktop and the casters showed up harmed however from a client standpoint you ‘d probably be actually excited to get this in