today we’re taking a look at a motorized sit-stand desk…Flexispot Height-adjustable… you may have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s extremely simple to put together, and it took my 11-year-old child and I (I mostly just monitored) under an hour from start to finish.
It’s very tough and can hold a great deal of weight. If you don’t believe me, have a look at the video listed below of it running while there’s a person resting on it.
The electrical raise/lower function is not only easy to use and quickly, but it’s also remarkably smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without providing it much thought.
On top of being practical, it also looks great in my office (I got the bamboo top desk).
The width is also adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a display stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also practical if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has options that are even more cost effective than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t always a big fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how durable the Flexispot is.
The practical cable tray was a little bit complicated to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the instructions.
You will require to buy an anti-fatigue mat to stay comfortable, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both excited (given that this implied it was going to be durable) and also a little reluctant (due to the fact that we all know how much of a challenge putting together furniture can be).
Thankfully, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the directions.
Is it worth getting a standing desk?
As soon as put together, I love the smooth look of this desk. I’m positive any of the many varied finishes that it is available in would look excellent in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The peaceful operation and height memory settings make it easy, effective, and peaceful to switch between sitting and standing as lot of times as you want throughout the day.
Finally, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop (or wish to rest on it for some reason) it has you covered. It will also equally distribute weight no matter how out of balance the weight you put on it is, it will not wobble or wiggle.
in that video is quite kitted out as the desk we’re looking at today is pretty standard I tried to get as near that as I could on uplifts website with similar setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is really 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation however as you need to know by now doesn’t affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can potentially get doing not have even any cable grommets for travel through the outside container
for the desktop was not damaged in any way which is utterly strange because I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just very rough male if I had actually bought this I ‘d have been on the phone with client service instantly they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function strangely definitely where any type of cable management products whatsoever the frame on this unit is a single motor dual stage style versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded too to both the dual stage double motor and a three-stage double motor which pushes the expense of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this model does come standard with the control board that permits up-and-down motion plus three memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is very quiet as in barely audible this outside a rate would be the one advantage I would offer this system over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift design over 35% more affordable even if you update this flexi area test to the dual motor three-stage style it still comes in a hundred and seventy dollars more affordable than the uplift however less expensive does not mean cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely offer it that however the lateral stability of this desk the horizontal movement at this price point it’s undesirable it’s rub salt in the wound here they include a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is definitely frustrating to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up harmed as well my prepare for this desk at this point is to lose the desk top and came with all together and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality office furniture that will last you this at finest seems like a more affordable replica of that it just does not feel quality and the difference in between this desk and my primary desk is night and day do do not hesitate to check out their site too which likewise feels strangely comparable to among their rivals there’s a wealth of devices you can get for the flexi area desk as much as and including a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our precious time covering different choices and accessories I might but I believe I’m happier that they only sent a fundamental desk because as a standard desk I’m not a fan of the quality control at this rate point and I do not believe slapping on a lot of additionals is the move when the core item isn’t what it ought to be they do use a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years very desk is five years and uplift desk is seven years if you are Flexispot Height-adjustable
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of video gaming and performance but I would invest the extra money it’s gon na take to get into a greater end maker like uplift desk or really desk and I haven’t personally used really desk items so I can’t speak on it but their reputation is excellent huge thanks to flexi area for sending this out for review regrettably I can not recommend this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with seeing as how both the desktop and the casters got here damaged but from a customer perspective you ‘d probably be truly thrilled to get this in