today we’re having a look at a motorized sit-stand desk…Flexispot F7D… you might have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was extremely positive.
It’s very easy to put together, and it took my 11-year-old daughter and I (I primarily just supervised) under an hour from start to finish.
It’s extremely durable and can hold a lot of weight. Check out the video listed below of it running while there’s an individual lying down on it if you do not think me.
The electrical raise/lower feature is not only easy to use and quick, but it’s also surprisingly smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it simple to switch between the two without giving it much thought.
On top of being practical, it likewise looks terrific in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a monitor stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is also helpful if your furry colleague likes to chew on or play with your cables.
Flexispot has choices that are even more budget friendly than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few functions that I wasn’t necessarily a big fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how tough the Flexispot is.
The convenient cable tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the guidelines.
You will need to purchase an anti-fatigue mat to stay comfy, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (considering that this suggested it was going to be strong) and likewise a little hesitant (due to the fact that we all know how much of an obstacle putting together furnishings can be).
Luckily, with the help of an educational YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t discussed well in the directions.
Is it worth getting a standing desk?
As soon as put together, I love the streamlined appearance of this desk. I’m confident any of the many varied finishes that it is available in would look excellent in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, efficient, and quiet to switch in between sitting and standing as many times as you desire throughout the day.
Last but not least, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a significant home computer (or wish to rest on it for some reason) it has you covered. It will also uniformly disperse weight no matter how out of balance the weight you place on it is, it will not wobble or wiggle.
in that video is pretty kitted out as the desk we’re taking a look at today is quite fundamental I tried to get as near that as I might on uplifts website with equivalent configurations the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is actually five inches longer but you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for review but as you ought to understand by now does not affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can possibly get lacking even any cable grommets for go through the outside container
for the desktop was not harmed in any way which is utterly unusual since I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just extremely rough guy if I had actually acquired this I ‘d have been on the phone with customer care right away they did also managed to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function strangely definitely where any sort of cable management materials whatsoever the frame on this system is a single motor double phase style versus the double motor three-stage design that comes requirement with the uplift desk this can be upgraded too to both the double stage dual motor and a three-stage double motor which presses the expense of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this model does come basic with the control board that enables up-and-down motion plus 3 memory areas with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be slow is very quiet as in barely audible this outside a cost would be the one advantage I would give this unit over the uplift desk and I wish to beware here because this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift model over 35% cheaper even if you upgrade this flexi area test to the double motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift however cheaper doesn’t mean low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely give it that however the lateral stability of this desk the horizontal motion at this rate point it’s unacceptable it’s add fuel to the fire here they include a little safety baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is definitely infuriating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here harmed also my prepare for this desk at this moment is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furniture that will last you this at finest seems like a more affordable replica of that it simply doesn’t feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to check out their site too which likewise feels eerily similar to one of their competitors there’s a wealth of accessories you can get for the flexi area desk approximately and including a foot massager and even a stationary exercise bike and I could spend another 10 minutes of our valuable time covering numerous options and accessories I could but I believe I’m happier that they just sent out a standard desk because as a basic desk I’m not a fan of the quality control at this price point and I do not believe slapping on a bunch of bonus is the relocation when the core product isn’t what it ought to be they do use a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years very desk is 5 years and uplift desk is 7 years if you are Flexispot F7D
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of gaming and performance but I would invest the additional money it’s gon na require to get into a greater end producer like uplift desk or extremely desk and I have not personally used very desk products so I can’t speak on it but their reputation is very good huge thanks to flexi spot for sending this out for review regrettably I can not recommend this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with viewing as how both the desktop and the casters got here damaged but from a client viewpoint you ‘d probably be actually excited to get this in