today we’re having a look at a motorized sit-stand desk…Flexispot Electric Standing Desk… you may have seen my evaluation on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was extremely positive.
It’s extremely easy to put together, and it took my 11-year-old daughter and I (I primarily simply monitored) under an hour from start to finish.
It’s very durable and can hold a lot of weight. Check out the video below of it operating while there’s an individual lying down on it if you don’t believe me.
The electric raise/lower feature is not just easy to use and quick, however it’s also surprisingly smooth and quiet.
You can program your favored standing and sitting heights, and it will remember them, making it simple to change between the two without offering it much thought.
On top of being functional, it likewise looks terrific in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a monitor stand to your workstation).
The cable tray keeps all of those charging cords organized, which is also handy if your furry colleague likes to chew on or play with your cables.
Flexispot has choices that are far more budget friendly than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t necessarily a huge fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how sturdy the Flexispot is.
The practical cable television tray was a little bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the instructions.
You will require to purchase an anti-fatigue mat to remain comfortable, but this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (because this suggested it was going to be durable) and likewise a little hesitant (because we all know just how much of an obstacle putting together furnishings can be).
Luckily, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t described well in the instructions.
Is it worth getting a standing desk?
Once assembled, I love the sleek look of this desk. I’m positive any of the many diverse finishes that it can be found in would look terrific in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it easy, efficient, and quiet to change between sitting and standing as often times as you want throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a significant desktop (or want to sleep on it for some reason) it has you covered. It will likewise uniformly disperse weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
in that video is pretty kitted out as the desk we’re looking at today is quite standard I tried to get as near that as I could on uplifts site with similar setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is in fact 5 inches longer however you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for review however as you should understand by now does not impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering up until completion of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can perhaps get lacking even any cable television grommets for pass through the outside container
for the desktop was not damaged in any way which is absolutely unusual since I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply incredibly rough man if I had actually acquired this I ‘d have been on the phone with customer care immediately they did likewise handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function unusually absolutely where any kind of cable management products whatsoever the frame on this unit is a single motor double stage design versus the double motor three-stage design that comes requirement with the uplift desk this can be updated as well to both the dual stage dual motor and a three-stage dual motor which presses the cost of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this design does come standard with the control board that allows for up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is very quiet as in barely audible this outside a price would be the one benefit I would give this system over the uplift desk and I wish to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% more affordable even if you upgrade this flexi area test to the double motor three-stage design it still can be found in a hundred and seventy dollars cheaper than the uplift but cheaper does not indicate inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that however the lateral stability of this desk the horizontal motion at this rate point it’s unacceptable it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the noise and this baffle is absolutely infuriating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived damaged too my prepare for this desk at this point is to lose the desk top and featured completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furnishings that will last you this at best feels like a less expensive imitation of that it simply does not feel quality and the distinction between this desk and my main desk is night and day do feel free to have a look at their site too which also feels eerily comparable to among their competitors there’s a wealth of accessories you can get for the flexi spot desk approximately and including a foot massager and even a stationary stationary bicycle and I might invest another 10 minutes of our valuable time covering numerous options and accessories I could but I think I’m happier that they only sent out a basic desk because as a standard desk I’m not a fan of the quality assurance at this rate point and I don’t believe slapping on a bunch of bonus is the move when the core item isn’t what it need to be they do provide a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years really desk is five years and uplift desk is seven years if you are Flexispot Electric Standing Desk
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to gaming and productivity but I would spend the additional money it’s gon na take to enter a greater end producer like uplift desk or extremely desk and I haven’t personally used very desk items so I can’t speak on it but their track record is very good big thanks to flexi spot for sending this out for evaluation unfortunately I can not recommend this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with viewing as how both the desktop and the casters got here harmed but from a client viewpoint you ‘d most likely be truly thrilled to get this in