today we’re taking a look at a motorized sit-stand desk…Flexispot Ec1 Vs Eg1… you might have seen my evaluation on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s really simple to assemble, and it took my 11-year-old daughter and I (I mostly just supervised) under an hour from start to finish.
It’s incredibly tough and can hold a lot of weight. Check out the video listed below of it running while there’s an individual lying down on it if you don’t think me.
The electrical raise/lower feature is not just easy to use and quick, however it’s likewise surprisingly smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without giving it much thought.
On top of being functional, it also looks terrific in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a monitor stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is also practical if your furry colleague likes to chew on or have fun with your cables.
Flexispot has alternatives that are far more budget-friendly than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t necessarily a substantial fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, but this is just a consequence of how durable the Flexispot is.
The convenient cable television tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t really clear from the guidelines.
You will require to purchase an anti-fatigue mat to remain comfy, but this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (because this implied it was going to be strong) and also a little reluctant (due to the fact that all of us understand just how much of an obstacle putting together furniture can be).
The good news is, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t described well in the guidelines.
Is it worth getting a standing desk?
When put together, I like the sleek appearance of this desk. I’m confident any of the many varied surfaces that it comes in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, efficient, and peaceful to change between sitting and standing as sometimes as you want throughout the day.
This desk is tough. It can hold up to 335 pounds even while in operation, so if you have a large desktop computer (or wish to rest on it for some reason) it has you covered. It will also evenly disperse weight no matter how unbalanced the weight you put on it is, it won’t wobble or wiggle.
because video is pretty kitted out as the desk we’re taking a look at today is quite basic I tried to get as close to that as I might on uplifts website with similar setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is in fact five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you should know by now does not impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can potentially get doing not have even any cable grommets for travel through the outside carton
for the desktop was not damaged in any way which is absolutely strange due to the fact that I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just very rough male if I had purchased this I ‘d have been on the phone with customer support instantly they did likewise managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function oddly definitely where any type of cable television management materials whatsoever the frame on this unit is a single motor double stage style versus the double motor three-stage style that comes requirement with the uplift desk this can be updated also to both the dual phase double motor and a three-stage double motor which presses the expense of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this design does come standard with the control board that enables up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be slow is extremely quiet as in barely audible this outside a cost would be the one advantage I would offer this unit over the uplift desk and I wish to beware here because this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift design over 35% more affordable even if you update this flexi spot test to the double motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift however cheaper does not imply low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly provide it that but the lateral stability of this desk the horizontal motion at this rate point it’s unacceptable it’s add fuel to the fire here they consist of a little security baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is definitely shocking to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up harmed also my plan for this desk at this point is to lose the desk top and came with all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality workplace furnishings that will last you this at finest feels like a more affordable imitation of that it just doesn’t feel quality and the difference between this desk and my main desk is night and day do feel free to check out their site as well which likewise feels strangely comparable to among their competitors there’s a wealth of devices you can get for the flexi spot desk approximately and consisting of a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our precious time covering different alternatives and devices I might but I believe I’m happier that they only sent out a fundamental desk since as a basic desk I’m not a fan of the quality control at this rate point and I don’t think slapping on a lot of bonus is the relocation when the core item isn’t what it need to be they do offer a 30-day trial if you’re just morbidly curious and they warranty their desks for three years extremely desk is five years and uplift desk is seven years if you are Flexispot Ec1 Vs Eg1
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of video gaming and performance but I would spend the extra money it’s gon na require to enter a higher end maker like uplift desk or extremely desk and I have not personally used extremely desk products so I can’t speak on it but their credibility is excellent big thanks to flexi spot for sending this out for review regrettably I can not recommend this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with seeing as how both the desktop and the casters showed up harmed but from a client perspective you ‘d most likely be actually delighted to get this in