today we’re having a look at a motorized sit-stand desk…Flexispot E9B… you may have seen my review on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s really simple to put together, and it took my 11-year-old daughter and I (I mostly just supervised) under an hour from start to finish.
It’s incredibly sturdy and can hold a lot of weight. If you don’t think me, take a look at the video below of it operating while there’s a person lying down on it.
The electrical raise/lower function is not only easy to use and quick, but it’s also surprisingly smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without giving it much idea.
On top of being functional, it likewise looks excellent in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a screen stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise handy if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has choices that are far more budget friendly than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t necessarily a huge fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how durable the Flexispot is.
The convenient cable tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the guidelines.
You will need to buy an anti-fatigue mat to remain comfy, but this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (because this implied it was going to be tough) and also a little hesitant (since we all understand how much of a challenge putting together furnishings can be).
Thankfully, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t described well in the instructions.
Is it worth getting a standing desk?
Once put together, I enjoy the sleek appearance of this desk. I’m positive any of the many varied surfaces that it comes in would look excellent in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The peaceful operation and height memory settings make it simple, effective, and peaceful to switch in between sitting and standing as lot of times as you want throughout the day.
Last but not least, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop computer (or want to rest on it for some reason) it has you covered. It will also uniformly disperse weight no matter how out of balance the weight you place on it is, it will not wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is quite standard I attempted to get as near that as I might on uplifts site with similar configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is actually five inches longer however you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for review but as you must know by now doesn’t impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering up until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can perhaps get lacking even any cable grommets for go through the outdoors container
for the desktop was not harmed in any way which is utterly unusual due to the fact that I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply extremely rough guy if I had actually acquired this I ‘d have been on the phone with client service immediately they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each component to support motorized function strangely definitely where any sort of cable television management products whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage design that comes standard with the uplift desk this can be updated too to both the dual phase double motor and a three-stage dual motor which pushes the expense of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than high enough even for me and I stay at 6 foot for this model does come standard with the control panel that permits up-and-down movement plus 3 memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is extremely quiet as in barely audible this outside a price would be the one advantage I would provide this system over the uplift desk and I wish to be careful here because this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% less expensive even if you update this flexi spot test to the double motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift but cheaper does not imply cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely offer it that however the lateral stability of this desk the horizontal motion at this cost point it’s inappropriate it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is absolutely shocking to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here harmed also my prepare for this desk at this point is to lose the desk top and came with completely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality office furnishings that will last you this at finest feels like a cheaper imitation of that it simply does not feel quality and the distinction in between this desk and my main desk is night and day do feel free to take a look at their site too which also feels strangely similar to among their rivals there’s a wealth of devices you can get for the flexi spot desk up to and including a foot massager and even a stationary stationary bicycle and I might spend another 10 minutes of our valuable time covering numerous options and devices I could but I believe I’m better that they just sent a fundamental desk since as a fundamental desk I’m not a fan of the quality assurance at this price point and I do not think slapping on a bunch of bonus is the move when the core item isn’t what it need to be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years very desk is five years and uplift desk is 7 years if you are Flexispot E9B
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and performance however I would invest the additional money it’s gon na take to get into a higher end manufacturer like uplift desk or really desk and I haven’t personally utilized really desk items so I can’t speak on it but their track record is great big thanks to flexi spot for sending this out for review unfortunately I can not advise this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with seeing as how both the desktop and the casters showed up damaged however from a consumer standpoint you ‘d most likely be actually excited to get this in