today we’re taking a look at a motorized sit-stand desk…Flexispot E8 Erfahrung… you might have seen my evaluation on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are a lot of things to love about the Flexispot E7. In general, my experience was very favorable.
It’s really easy to put together, and it took my 11-year-old daughter and I (I mostly just monitored) under an hour from start to finish.
It’s very strong and can hold a great deal of weight. Check out the video listed below of it running while there’s a person lying down on it if you do not believe me.
The electrical raise/lower function is not only easy to use and quickly, however it’s likewise surprisingly smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without offering it much thought.
On top of being functional, it likewise looks fantastic in my office (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a display stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also practical if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has alternatives that are even more economical than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of functions that I wasn’t necessarily a substantial fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how tough the Flexispot is.
The practical cable tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the directions.
You will need to buy an anti-fatigue mat to stay comfortable, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both ecstatic (given that this implied it was going to be strong) and likewise a little reluctant (due to the fact that all of us know just how much of an obstacle putting together furnishings can be).
Luckily, with the help of an instructional YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t explained well in the instructions.
Is it worth getting a standing desk?
When assembled, I love the smooth appearance of this desk. I’m positive any of the many diverse finishes that it is available in would look terrific in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it easy, effective, and peaceful to change between sitting and standing as sometimes as you want throughout the day.
This desk is strong. It can hold up to 335 pounds even while in operation, so if you have a significant home computer (or wish to take a nap on it for some reason) it has you covered. It will also equally distribute weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is pretty standard I tried to get as close to that as I might on uplifts site with comparable configurations the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is really 5 inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for evaluation however as you should know by now doesn’t impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get doing not have even any cable television grommets for travel through the outdoors carton
for the desktop was not damaged in any way which is absolutely strange due to the fact that I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just very rough male if I had purchased this I ‘d have been on the phone with customer support instantly they did likewise managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function oddly absolutely where any kind of cable management products whatsoever the frame on this system is a single motor dual phase design versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded also to both the double stage double motor and a three-stage dual motor which pushes the expense of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this design does come basic with the control board that allows for up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a price would be the one benefit I would offer this unit over the uplift desk and I wish to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift model over 35% cheaper even if you upgrade this flexi area test to the double motor three-stage design it still comes in a hundred and seventy dollars less expensive than the uplift however cheaper does not imply cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal movement at this cost point it’s undesirable it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the noise is definitely shocking to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived harmed as well my plan for this desk at this point is to lose the desk top and came with all together and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furnishings that will last you this at finest seems like a cheaper imitation of that it simply doesn’t feel quality and the difference between this desk and my main desk is night and day do do not hesitate to have a look at their site as well which also feels strangely comparable to among their competitors there’s a wealth of devices you can get for the flexi area desk approximately and consisting of a foot massager and even a stationary exercise bike and I could spend another 10 minutes of our precious time covering different choices and accessories I could but I think I’m happier that they only sent out a standard desk since as a fundamental desk I’m not a fan of the quality control at this price point and I don’t think slapping on a bunch of extras is the move when the core item isn’t what it need to be they do offer a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years extremely desk is 5 years and uplift desk is 7 years if you are Flexispot E8 Erfahrung
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to gaming and efficiency but I would invest the additional money it’s gon na require to enter a greater end manufacturer like uplift desk or extremely desk and I haven’t personally used really desk products so I can’t speak on it however their track record is excellent huge thanks to flexi area for sending this out for evaluation sadly I can not advise this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with viewing as how both the desktop and the casters arrived damaged but from a customer perspective you ‘d most likely be truly thrilled to get this in