today we’re having a look at a motorized sit-stand desk…Flexispot E7 Pro E8… you might have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was very positive.
It’s really easy to put together, and it took my 11-year-old daughter and I (I mainly just monitored) under an hour from start to finish.
It’s very sturdy and can hold a great deal of weight. Examine out the video listed below of it running while there’s an individual lying down on it if you don’t believe me.
The electric raise/lower feature is not only easy to use and quickly, but it’s also surprisingly smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without giving it much idea.
On top of being functional, it likewise looks excellent in my office (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a display stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is likewise practical if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has alternatives that are even more inexpensive than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of functions that I wasn’t necessarily a substantial fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just an effect of how strong the Flexispot is.
The practical cable television tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will need to buy an anti-fatigue mat to stay comfortable, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (given that this implied it was going to be durable) and also a little hesitant (due to the fact that all of us know just how much of a difficulty assembling furniture can be).
Luckily, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
When put together, I like the smooth look of this desk. I’m confident any of the many varied finishes that it comes in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it simple, effective, and peaceful to switch in between sitting and standing as many times as you want throughout the day.
Finally, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a significant home computer (or wish to take a nap on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how unbalanced the weight you put on it is, it won’t wiggle or wobble.
in that video is quite kitted out as the desk we’re taking a look at today is quite basic I tried to get as near to that as I could on uplifts website with comparable configurations the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is actually 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review however as you must know by now does not impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can possibly get lacking even any cable television grommets for pass through the outside carton
for the desktop was not harmed in any way which is utterly strange since I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just very rough guy if I had actually bought this I ‘d have been on the phone with customer support right away they did also handled to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function oddly definitely where any sort of cable television management products whatsoever the frame on this system is a single motor double stage design versus the double motor three-stage design that comes standard with the uplift desk this can be upgraded also to both the double phase double motor and a three-stage double motor which presses the expense of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than high enough even for me and I stay at 6 foot for this design does come standard with the control panel that enables up-and-down movement plus three memory spots with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a cost would be the one advantage I would offer this system over the uplift desk and I want to beware here because this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift design over 35% cheaper even if you update this flexi area test to the dual motor three-stage style it still is available in a hundred and seventy dollars less expensive than the uplift however cheaper doesn’t imply cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll definitely offer it that however the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s add insult to injury here they include a little security baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits the sound and this baffle is definitely frustrating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here damaged as well my prepare for this desk at this point is to lose the desk top and featured all together and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality office furnishings that will last you this at best seems like a cheaper imitation of that it just does not feel quality and the difference in between this desk and my main desk is night and day do do not hesitate to check out their site as well which likewise feels strangely comparable to one of their rivals there’s a wealth of devices you can get for the flexi area desk as much as and consisting of a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our valuable time covering different options and devices I could however I think I’m better that they just sent out a standard desk because as a basic desk I’m not a fan of the quality assurance at this price point and I don’t think slapping on a bunch of additionals is the move when the core product isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years very desk is five years and uplift desk is 7 years if you are Flexispot E7 Pro E8
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and efficiency but I would invest the money it’s gon na take to enter a greater end producer like uplift desk or extremely desk and I haven’t personally used really desk items so I can’t speak on it however their credibility is excellent big thanks to flexi area for sending this out for evaluation sadly I can not advise this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with viewing as how both the desktop and the casters showed up harmed but from a customer perspective you ‘d probably be truly excited to get this in