today we’re having a look at a motorized sit-stand desk…Flexispot E7 Ef1… you may have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was extremely favorable.
It’s extremely easy to put together, and it took my 11-year-old child and I (I mostly simply monitored) under an hour from start to finish.
It’s very sturdy and can hold a great deal of weight. If you do not believe me, have a look at the video listed below of it running while there’s an individual resting on it.
The electric raise/lower feature is not only easy to use and quick, however it’s likewise surprisingly smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to change in between the two without providing it much idea.
On top of being functional, it likewise looks fantastic in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a display stand to your workstation).
The cable tray keeps all of those charging cables organized, which is likewise helpful if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has choices that are far more affordable than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of functions that I wasn’t always a huge fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is just a consequence of how strong the Flexispot is.
The practical cable tray was a little bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will require to purchase an anti-fatigue mat to remain comfy, but this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (given that this suggested it was going to be tough) and also a little hesitant (since all of us understand just how much of a difficulty putting together furnishings can be).
Fortunately, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
When put together, I enjoy the sleek look of this desk. I’m positive any of the many varied finishes that it is available in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, efficient, and peaceful to change between sitting and standing as many times as you want throughout the day.
Lastly, this desk is durable. It can hold up to 335 lbs even while in operation, so if you have a significant desktop computer (or want to sleep on it for some reason) it has you covered. It will likewise equally disperse weight no matter how unbalanced the weight you put on it is, it won’t wiggle or wobble.
because video is quite kitted out as the desk we’re taking a look at today is quite standard I tried to get as close to that as I might on uplifts site with similar setups the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is in fact five inches longer but you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for evaluation but as you ought to understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can possibly get lacking even any cable television grommets for pass through the outside carton
for the desktop was not harmed in any way which is absolutely bizarre because I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just extremely rough guy if I had actually purchased this I ‘d have been on the phone with client service instantly they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function unusually absolutely where any sort of cable television management products whatsoever the frame on this unit is a single motor double stage style versus the dual motor three-stage style that comes requirement with the uplift desk this can be updated as well to both the dual phase double motor and a three-stage double motor which pushes the cost of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than high enough even for me and I stay at 6 foot for this model does come basic with the control panel that permits up-and-down movement plus 3 memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a rate would be the one advantage I would provide this unit over the uplift desk and I want to be careful here since this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift model over 35% cheaper even if you update this flexi spot test to the dual motor three-stage style it still is available in a hundred and seventy dollars more affordable than the uplift however more affordable does not mean inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll definitely provide it that but the lateral stability of this desk the horizontal movement at this cost point it’s inappropriate it’s rub salt in the wound here they consist of a little security baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits the sound and this baffle is definitely infuriating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up harmed also my plan for this desk at this moment is to lose the desk top and featured completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furnishings that will last you this at best seems like a more affordable imitation of that it just does not feel quality and the distinction in between this desk and my primary desk is night and day do feel free to have a look at their site too which also feels eerily comparable to among their competitors there’s a wealth of accessories you can get for the flexi area desk up to and including a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our precious time covering numerous choices and accessories I could but I think I’m better that they only sent a standard desk since as a fundamental desk I’m not a fan of the quality assurance at this price point and I do not think slapping on a lot of extras is the move when the core item isn’t what it ought to be they do provide a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years extremely desk is 5 years and uplift desk is 7 years if you are Flexispot E7 Ef1
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to video gaming and efficiency however I would spend the additional money it’s gon na require to enter into a greater end manufacturer like uplift desk or extremely desk and I have not personally utilized very desk products so I can’t speak on it however their credibility is excellent big thanks to flexi spot for sending this out for evaluation unfortunately I can not advise this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with seeing as how both the desktop and the casters arrived harmed but from a customer perspective you ‘d most likely be actually thrilled to get this in