today we’re having a look at a motorized sit-stand desk…Flexispot E2… you might have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was very positive.
It’s very simple to assemble, and it took my 11-year-old child and I (I primarily just monitored) under an hour from start to finish.
It’s super tough and can hold a lot of weight. Examine out the video listed below of it operating while there’s a person lying down on it if you do not believe me.
The electrical raise/lower feature is not just easy to use and quick, but it’s likewise remarkably smooth and quiet.
You can program your favored standing and sitting heights, and it will remember them, making it simple to change in between the two without providing it much idea.
On top of being practical, it also looks fantastic in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a display stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is also handy if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has alternatives that are far more inexpensive than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t necessarily a huge fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how tough the Flexispot is.
The hassle-free cable tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the instructions.
You will require to purchase an anti-fatigue mat to stay comfortable, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (considering that this implied it was going to be tough) and also a little hesitant (due to the fact that we all understand just how much of a challenge assembling furnishings can be).
Fortunately, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
When assembled, I love the smooth appearance of this desk. I’m confident any of the many diverse surfaces that it can be found in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, efficient, and peaceful to change in between sitting and standing as lot of times as you want throughout the day.
Lastly, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a large home computer (or wish to rest on it for some reason) it has you covered. It will likewise uniformly disperse weight no matter how unbalanced the weight you place on it is, it won’t wiggle or wobble.
because video is pretty kitted out as the desk we’re looking at today is quite fundamental I attempted to get as close to that as I could on uplifts website with equivalent configurations the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is in fact five inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for review but as you must know by now doesn’t impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering up until completion of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can possibly get lacking even any cable grommets for pass through the outdoors carton
for the desktop was not damaged in any way which is absolutely unusual because I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply super rough man if I had bought this I ‘d have been on the phone with customer support right away they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each component to support motorized function oddly absolutely where any kind of cable management products whatsoever the frame on this system is a single motor dual phase style versus the dual motor three-stage style that comes standard with the uplift desk this can be updated also to both the double phase double motor and a three-stage dual motor which presses the cost of the desk up
an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this model does come standard with the control board that enables up-and-down motion plus 3 memory spots with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a rate would be the one advantage I would offer this unit over the uplift desk and I want to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift model over 35% more affordable even if you update this flexi spot test to the double motor three-stage design it still comes in a hundred and seventy dollars more affordable than the uplift however less expensive doesn’t imply inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely give it that however the lateral stability of this desk the horizontal movement at this rate point it’s inappropriate it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the noise is absolutely frustrating to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived harmed as well my plan for this desk at this moment is to lose the desk top and included entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to movie items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furniture that will last you this at finest feels like a cheaper imitation of that it just does not feel quality and the distinction between this desk and my main desk is night and day do do not hesitate to have a look at their site also which likewise feels eerily comparable to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk approximately and consisting of a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our precious time covering various options and devices I could but I think I’m better that they just sent a standard desk since as a standard desk I’m not a fan of the quality assurance at this cost point and I don’t believe slapping on a lot of bonus is the relocation when the core product isn’t what it need to be they do use a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years really desk is 5 years and uplift desk is seven years if you are Flexispot E2
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of video gaming and performance however I would invest the money it’s gon na require to get into a greater end maker like uplift desk or extremely desk and I haven’t personally utilized extremely desk items so I can’t speak on it but their track record is very good huge thanks to flexi spot for sending this out for evaluation sadly I can not recommend this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with seeing as how both the desktop and the casters arrived damaged however from a customer viewpoint you ‘d most likely be really excited to get this in