today we’re having a look at a motorized sit-stand desk…Flexispot Desk Setup… you may have seen my evaluation on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s very easy to put together, and it took my 11-year-old child and I (I mostly just supervised) under an hour from start to finish.
It’s extremely tough and can hold a lot of weight. Inspect out the video below of it operating while there’s an individual lying down on it if you don’t believe me.
The electrical raise/lower feature is not only easy to use and quickly, but it’s also remarkably smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it easy to switch between the two without providing it much thought.
On top of being functional, it also looks fantastic in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a display stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is also useful if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has choices that are even more affordable than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few features that I wasn’t always a big fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how strong the Flexispot is.
The hassle-free cable tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the instructions.
You will need to buy an anti-fatigue mat to remain comfy, but this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (given that this implied it was going to be durable) and likewise a little reluctant (because all of us know just how much of a difficulty assembling furnishings can be).
Luckily, with the help of an instructional YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t described well in the guidelines.
Is it worth getting a standing desk?
As soon as assembled, I enjoy the streamlined appearance of this desk. I’m confident any of the many diverse surfaces that it comes in would look terrific in any workplace, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, effective, and quiet to switch between sitting and standing as sometimes as you want throughout the day.
Finally, this desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a large desktop (or want to take a nap on it for some reason) it has you covered. It will likewise equally disperse weight no matter how out of balance the weight you put on it is, it will not wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is quite basic I tried to get as close to that as I might on uplifts website with equivalent configurations the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is really five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review however as you need to understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can possibly get doing not have even any cable grommets for pass through the outside carton
for the desktop was not harmed in any way which is entirely bizarre since I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply extremely rough man if I had acquired this I ‘d have been on the phone with customer support immediately they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function unusually definitely where any sort of cable management materials whatsoever the frame on this system is a single motor double stage design versus the double motor three-stage design that comes requirement with the uplift desk this can be upgraded as well to both the dual stage double motor and a three-stage dual motor which pushes the expense of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this model does come standard with the control panel that enables up-and-down motion plus 3 memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a rate would be the one advantage I would give this unit over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift design over 35% cheaper even if you upgrade this flexi area test to the double motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift but more affordable does not suggest inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely provide it that but the lateral stability of this desk the horizontal movement at this cost point it’s unacceptable it’s add fuel to the fire here they consist of a little security baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits the noise and this baffle is absolutely shocking to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up damaged as well my plan for this desk at this point is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furnishings that will last you this at finest feels like a more affordable imitation of that it just doesn’t feel quality and the difference between this desk and my main desk is night and day do do not hesitate to have a look at their site as well which likewise feels eerily similar to among their competitors there’s a wealth of accessories you can get for the flexi spot desk approximately and including a foot massager and even a stationary stationary bicycle and I might invest another 10 minutes of our precious time covering numerous options and devices I might however I believe I’m happier that they just sent a standard desk due to the fact that as a fundamental desk I’m not a fan of the quality control at this price point and I do not believe slapping on a lot of extras is the move when the core product isn’t what it ought to be they do use a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years very desk is five years and uplift desk is 7 years if you are Flexispot Desk Setup
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and efficiency but I would spend the additional money it’s gon na require to enter into a greater end manufacturer like uplift desk or extremely desk and I have not personally utilized extremely desk items so I can’t speak on it however their credibility is excellent big thanks to flexi spot for sending this out for evaluation unfortunately I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with viewing as how both the desktop and the casters arrived harmed but from a consumer standpoint you ‘d most likely be really delighted to get this in