today we’re having a look at a motorized sit-stand desk…Flexispot Customer Support… you might have seen my review on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s very easy to assemble, and it took my 11-year-old daughter and I (I mainly simply monitored) under an hour from start to finish.
It’s super tough and can hold a lot of weight. Check out the video below of it running while there’s an individual lying down on it if you do not think me.
The electric raise/lower function is not only easy to use and quickly, but it’s likewise surprisingly smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without giving it much idea.
On top of being functional, it likewise looks terrific in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a monitor stand to your workstation).
The cable tray keeps all of those charging cords organized, which is also useful if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has alternatives that are far more budget friendly than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few functions that I wasn’t necessarily a substantial fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, however this is just a consequence of how tough the Flexispot is.
The convenient cable tray was a bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will need to buy an anti-fatigue mat to remain comfy, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (considering that this suggested it was going to be tough) and also a little reluctant (due to the fact that all of us understand just how much of a difficulty putting together furniture can be).
Luckily, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
When put together, I enjoy the smooth look of this desk. I’m confident any of the many diverse finishes that it can be found in would look great in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, efficient, and peaceful to change in between sitting and standing as often times as you desire throughout the day.
This desk is strong. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop (or want to rest on it for some reason) it has you covered. It will likewise uniformly distribute weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
in that video is pretty kitted out as the desk we’re looking at today is pretty fundamental I tried to get as close to that as I could on uplifts website with equivalent setups the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is actually 5 inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for review however as you must understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can perhaps get lacking even any cable grommets for go through the outside container
for the desktop was not damaged in any way which is entirely strange because I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply super rough man if I had actually bought this I ‘d have been on the phone with customer care instantly they did also managed to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function strangely definitely where any sort of cable management materials whatsoever the frame on this system is a single motor dual stage style versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded as well to both the double stage double motor and a three-stage dual motor which presses the expense of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than high enough even for me and I stay at 6 foot for this design does come standard with the control board that enables up-and-down movement plus 3 memory spots with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a cost would be the one benefit I would give this system over the uplift desk and I want to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift model over 35% less expensive even if you upgrade this flexi spot test to the dual motor three-stage design it still is available in a hundred and seventy dollars cheaper than the uplift but less expensive doesn’t mean inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that but the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s rub salt in the wound here they include a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits the sound and this baffle is absolutely infuriating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up harmed as well my plan for this desk at this point is to lose the desk top and featured completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality workplace furnishings that will last you this at best feels like a more affordable imitation of that it simply does not feel quality and the difference in between this desk and my primary desk is night and day do do not hesitate to take a look at their site as well which likewise feels strangely similar to among their rivals there’s a wealth of devices you can get for the flexi area desk as much as and including a foot massager and even a stationary exercise bike and I could invest another 10 minutes of our precious time covering different options and devices I might but I think I’m happier that they only sent out a basic desk because as a standard desk I’m not a fan of the quality control at this cost point and I don’t believe slapping on a lot of additionals is the move when the core item isn’t what it ought to be they do offer a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years extremely desk is five years and uplift desk is seven years if you are Flexispot Customer Support
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and productivity however I would spend the money it’s gon na take to get into a higher end maker like uplift desk or very desk and I have not personally utilized very desk products so I can’t speak on it however their track record is great huge thanks to flexi spot for sending this out for review sadly I can not suggest this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with seeing as how both the desktop and the casters showed up damaged but from a consumer perspective you ‘d probably be really excited to get this in