today we’re taking a look at a motorized sit-stand desk…Flexispot Corner Standing Desk… you may have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s extremely easy to assemble, and it took my 11-year-old child and I (I mainly just monitored) under an hour from start to finish.
It’s extremely strong and can hold a great deal of weight. If you do not think me, take a look at the video below of it running while there’s a person resting on it.
The electric raise/lower function is not only easy to use and quick, but it’s also surprisingly smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it simple to switch between the two without giving it much thought.
On top of being practical, it also looks great in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a monitor stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is likewise useful if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has options that are much more budget friendly than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few functions that I wasn’t necessarily a huge fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, but this is just a consequence of how sturdy the Flexispot is.
The practical cable television tray was a little bit confusing to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the instructions.
You will need to purchase an anti-fatigue mat to remain comfy, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (considering that this meant it was going to be strong) and likewise a little reluctant (because we all know just how much of a challenge putting together furnishings can be).
Luckily, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t explained well in the instructions.
Is it worth getting a standing desk?
When put together, I enjoy the streamlined appearance of this desk. I’m confident any of the many diverse finishes that it is available in would look terrific in any office, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it easy, effective, and quiet to change in between sitting and standing as many times as you want throughout the day.
This desk is durable. It can hold up to 335 lbs even while in operation, so if you have a substantial home computer (or want to rest on it for some reason) it has you covered. It will also uniformly disperse weight no matter how out of balance the weight you put on it is, it won’t wiggle or wobble.
in that video is quite kitted out as the desk we’re looking at today is quite standard I tried to get as near to that as I might on uplifts website with comparable setups the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is in fact 5 inches longer but you can do a lot with five inches boom yes now for openness flexi area did send this desk out for review but as you must understand by now does not impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can perhaps get lacking even any cable grommets for pass through the outdoors container
for the desktop was not harmed in any way which is utterly bizarre since I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply very rough guy if I had actually bought this I ‘d have been on the phone with client service immediately they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each component to support motorized function unusually absolutely where any sort of cable management products whatsoever the frame on this system is a single motor double stage style versus the double motor three-stage design that comes requirement with the uplift desk this can be updated as well to both the double stage double motor and a three-stage double motor which pushes the expense of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this design does come standard with the control board that enables up-and-down motion plus three memory spots with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a cost would be the one advantage I would offer this system over the uplift desk and I wish to be careful here because this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift model over 35% less expensive even if you update this flexi area test to the double motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift but more affordable does not mean cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely give it that but the lateral stability of this desk the horizontal movement at this cost point it’s unacceptable it’s add insult to injury here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the sound and this baffle is absolutely frustrating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived damaged as well my prepare for this desk at this point is to lose the desk top and included entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to movie items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality office furniture that will last you this at best feels like a less expensive replica of that it simply doesn’t feel quality and the difference between this desk and my primary desk is night and day do feel free to have a look at their site too which likewise feels strangely similar to among their rivals there’s a wealth of devices you can get for the flexi area desk as much as and including a foot massager and even a fixed stationary bicycle and I could invest another 10 minutes of our valuable time covering various choices and devices I might however I think I’m happier that they only sent a standard desk because as a standard desk I’m not a fan of the quality control at this rate point and I don’t believe slapping on a bunch of extras is the move when the core item isn’t what it ought to be they do provide a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years extremely desk is five years and uplift desk is seven years if you are Flexispot Corner Standing Desk
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and productivity however I would spend the money it’s gon na take to enter into a greater end manufacturer like uplift desk or extremely desk and I haven’t personally utilized very desk items so I can’t speak on it but their reputation is great big thanks to flexi spot for sending this out for review sadly I can not advise this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with viewing as how both the desktop and the casters arrived harmed however from a customer perspective you ‘d most likely be actually thrilled to get this in