today we’re having a look at a motorized sit-stand desk…Flexispot Classicriser Standing Desk Converter… you may have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was extremely positive.
It’s very easy to assemble, and it took my 11-year-old child and I (I primarily just supervised) under an hour from start to finish.
It’s super durable and can hold a lot of weight. Inspect out the video below of it operating while there’s a person lying down on it if you don’t think me.
The electric raise/lower feature is not just easy to use and quick, but it’s also remarkably smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to switch in between the two without giving it much idea.
On top of being practical, it also looks great in my office (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a screen stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is likewise helpful if your furry coworker likes to chew on or have fun with your cables.
Flexispot has alternatives that are far more inexpensive than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t necessarily a big fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a consequence of how strong the Flexispot is.
The convenient cable television tray was a little bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the directions.
You will require to purchase an anti-fatigue mat to stay comfy, but this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (given that this indicated it was going to be tough) and also a little hesitant (since we all know how much of a challenge assembling furnishings can be).
The good news is, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t explained well in the instructions.
Is it worth getting a standing desk?
Once assembled, I like the streamlined appearance of this desk. I’m confident any of the many diverse finishes that it comes in would look great in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of office.
The quiet operation and height memory settings make it easy, efficient, and quiet to switch in between sitting and standing as many times as you desire throughout the day.
This desk is tough. It can hold up to 335 pounds even while in operation, so if you have a large home computer (or want to take a nap on it for some reason) it has you covered. It will likewise equally disperse weight no matter how out of balance the weight you put on it is, it won’t wiggle or wobble.
because video is quite kitted out as the desk we’re taking a look at today is quite fundamental I attempted to get as close to that as I could on uplifts website with equivalent setups the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is really 5 inches longer however you can do a lot with five inches boom yes now for openness flexi area did send this desk out for evaluation however as you must know by now doesn’t affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can potentially get doing not have even any cable television grommets for go through the outside carton
for the desktop was not damaged in any way which is absolutely strange because I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just extremely rough man if I had actually acquired this I ‘d have been on the phone with customer service instantly they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function oddly absolutely where any sort of cable management products whatsoever the frame on this unit is a single motor dual stage style versus the dual motor three-stage style that comes requirement with the uplift desk this can be updated too to both the double stage double motor and a three-stage dual motor which pushes the cost of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this design does come standard with the control board that enables up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a cost would be the one advantage I would provide this unit over the uplift desk and I wish to beware here because this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% cheaper even if you upgrade this flexi spot test to the double motor three-stage design it still comes in a hundred and seventy dollars more affordable than the uplift however less expensive does not indicate inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely offer it that but the lateral stability of this desk the horizontal motion at this price point it’s unacceptable it’s add insult to injury here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the sound is absolutely infuriating to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those four casters got here damaged too my prepare for this desk at this moment is to lose the desk top and featured all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to film products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality workplace furnishings that will last you this at finest feels like a cheaper imitation of that it just does not feel quality and the difference between this desk and my primary desk is night and day do feel free to take a look at their website too which likewise feels strangely comparable to one of their rivals there’s a wealth of accessories you can get for the flexi area desk approximately and including a foot massager and even a stationary exercise bike and I might spend another 10 minutes of our valuable time covering different choices and devices I might however I believe I’m happier that they just sent a basic desk due to the fact that as a standard desk I’m not a fan of the quality assurance at this cost point and I do not believe slapping on a bunch of additionals is the relocation when the core item isn’t what it need to be they do provide a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years really desk is five years and uplift desk is seven years if you are Flexispot Classicriser Standing Desk Converter
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to video gaming and performance however I would spend the additional money it’s gon na require to enter into a greater end manufacturer like uplift desk or extremely desk and I haven’t personally used very desk products so I can’t speak on it but their credibility is great huge thanks to flexi area for sending this out for evaluation unfortunately I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with seeing as how both the desktop and the casters showed up damaged but from a customer standpoint you ‘d most likely be really excited to get this in