today we’re having a look at a motorized sit-stand desk…Flexispot 55 Inch Desk… you may have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was extremely favorable.
It’s extremely simple to put together, and it took my 11-year-old daughter and I (I mainly simply supervised) under an hour from start to finish.
It’s incredibly strong and can hold a lot of weight. If you don’t think me, have a look at the video listed below of it operating while there’s a person lying down on it.
The electric raise/lower feature is not just easy to use and fast, but it’s also surprisingly smooth and quiet.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without providing it much thought.
On top of being practical, it also looks fantastic in my workplace (I got the bamboo top desk).
The width is also adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also helpful if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has options that are far more inexpensive than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t always a substantial fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, but this is just a consequence of how durable the Flexispot is.
The convenient cable television tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the guidelines.
You will need to purchase an anti-fatigue mat to stay comfy, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (since this implied it was going to be sturdy) and likewise a little hesitant (since we all understand just how much of an obstacle putting together furnishings can be).
Luckily, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
When assembled, I love the streamlined look of this desk. I’m confident any of the many diverse finishes that it is available in would look great in any workplace, and the adjustable width makes it simple to fit it in even the smallest of office.
The peaceful operation and height memory settings make it simple, efficient, and quiet to change between sitting and standing as many times as you desire throughout the day.
Finally, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a significant desktop (or want to take a nap on it for some reason) it has you covered. It will also evenly distribute weight no matter how out of balance the weight you place on it is, it will not wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is quite basic I attempted to get as near that as I might on uplifts site with equivalent setups the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is really 5 inches longer however you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for review however as you ought to know by now does not impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can perhaps get lacking even any cable television grommets for travel through the outside carton
for the desktop was not harmed in any way which is absolutely unusual since I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just very rough guy if I had actually purchased this I ‘d have been on the phone with customer support instantly they did likewise managed to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function unusually absolutely where any sort of cable television management materials whatsoever the frame on this system is a single motor double stage style versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded too to both the double stage double motor and a three-stage double motor which pushes the expense of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this model does come basic with the control board that permits up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is really peaceful as in barely audible this outside a rate would be the one benefit I would provide this unit over the uplift desk and I want to be careful here since this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift design over 35% less expensive even if you update this flexi area test to the dual motor three-stage design it still can be found in a hundred and seventy dollars less expensive than the uplift but cheaper doesn’t suggest inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that however the lateral stability of this desk the horizontal motion at this price point it’s unacceptable it’s add insult to injury here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is absolutely shocking to top things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here damaged as well my plan for this desk at this point is to lose the desk top and came with completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furniture that will last you this at best seems like a more affordable replica of that it just does not feel quality and the difference between this desk and my primary desk is night and day do do not hesitate to check out their website also which likewise feels strangely comparable to among their competitors there’s a wealth of devices you can get for the flexi spot desk as much as and including a foot massager and even a stationary stationary bicycle and I could spend another 10 minutes of our valuable time covering various choices and accessories I could however I think I’m happier that they just sent a basic desk since as a fundamental desk I’m not a fan of the quality assurance at this cost point and I don’t believe slapping on a lot of additionals is the relocation when the core item isn’t what it should be they do use a 30-day trial if you’re simply morbidly curious and they guarantee their desks for 3 years extremely desk is five years and uplift desk is seven years if you are Flexispot 55 Inch Desk
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to video gaming and efficiency however I would invest the additional money it’s gon na require to get into a higher end manufacturer like uplift desk or really desk and I have not personally used really desk products so I can’t speak on it however their credibility is great huge thanks to flexi spot for sending this out for evaluation unfortunately I can not recommend this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with viewing as how both the desktop and the casters showed up damaged however from a client perspective you ‘d most likely be truly delighted to get this in