today we’re having a look at a motorized sit-stand desk…Flexispot 47 Inch… you may have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was very favorable.
It’s really easy to put together, and it took my 11-year-old daughter and I (I mainly simply monitored) under an hour from start to finish.
It’s super tough and can hold a great deal of weight. If you don’t think me, have a look at the video below of it running while there’s a person resting on it.
The electrical raise/lower feature is not just easy to use and quick, but it’s also remarkably smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to switch in between the two without providing it much idea.
On top of being functional, it also looks great in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a screen stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is also useful if your furry coworker likes to chew on or play with your cables.
Flexispot has choices that are even more economical than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t always a huge fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how tough the Flexispot is.
The convenient cable tray was a little bit complicated to install. In the end, you eventually slip it under screws, which wasn’t really clear from the guidelines.
You will require to purchase an anti-fatigue mat to stay comfy, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (considering that this indicated it was going to be sturdy) and likewise a little hesitant (due to the fact that we all understand just how much of a difficulty assembling furnishings can be).
Thankfully, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t described well in the directions.
Is it worth getting a standing desk?
When assembled, I love the smooth appearance of this desk. I’m confident any of the many varied finishes that it comes in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it easy, effective, and quiet to switch between sitting and standing as often times as you desire throughout the day.
Lastly, this desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a significant home computer (or want to rest on it for some reason) it has you covered. It will also evenly disperse weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is pretty fundamental I tried to get as near to that as I might on uplifts website with similar configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is actually five inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review but as you should know by now does not impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get lacking even any cable grommets for go through the outdoors carton
for the desktop was not harmed in any way which is utterly strange since I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just very rough male if I had actually bought this I ‘d have been on the phone with customer support instantly they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function strangely definitely where any type of cable television management products whatsoever the frame on this unit is a single motor dual phase design versus the dual motor three-stage design that comes requirement with the uplift desk this can be updated also to both the double stage double motor and a three-stage double motor which presses the cost of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this design does come basic with the control board that enables up-and-down movement plus three memory spots with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is very quiet as in barely audible this outside a rate would be the one benefit I would give this unit over the uplift desk and I wish to take care here because this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift design over 35% cheaper even if you update this flexi spot test to the dual motor three-stage style it still comes in a hundred and seventy dollars less expensive than the uplift however less expensive doesn’t imply low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly provide it that but the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s add fuel to the fire here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is absolutely infuriating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived damaged also my prepare for this desk at this point is to lose the desk top and included entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to movie items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality workplace furniture that will last you this at finest seems like a less expensive imitation of that it simply does not feel quality and the difference in between this desk and my main desk is night and day do feel free to take a look at their website also which likewise feels eerily similar to one of their competitors there’s a wealth of devices you can get for the flexi spot desk as much as and consisting of a foot massager and even a stationary exercise bike and I could spend another 10 minutes of our precious time covering numerous alternatives and accessories I could but I think I’m happier that they just sent a standard desk due to the fact that as a fundamental desk I’m not a fan of the quality control at this price point and I do not think slapping on a bunch of additionals is the move when the core item isn’t what it ought to be they do offer a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years very desk is five years and uplift desk is seven years if you are Flexispot 47 Inch
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to video gaming and productivity however I would invest the additional money it’s gon na take to enter into a higher end maker like uplift desk or extremely desk and I have not personally utilized very desk products so I can’t speak on it however their reputation is excellent huge thanks to flexi spot for sending this out for review sadly I can not advise this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with viewing as how both the desktop and the casters arrived damaged but from a customer standpoint you ‘d probably be truly delighted to get this in