today we’re taking a look at a motorized sit-stand desk…Flexispot 41 Corner… you may have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was really positive.
It’s extremely simple to put together, and it took my 11-year-old daughter and I (I mainly simply supervised) under an hour from start to finish.
It’s very tough and can hold a great deal of weight. Check out the video below of it operating while there’s an individual lying down on it if you don’t think me.
The electric raise/lower function is not just easy to use and quick, but it’s also surprisingly smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without providing it much thought.
On top of being practical, it also looks excellent in my office (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a screen stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is likewise practical if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has choices that are much more budget friendly than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few features that I wasn’t necessarily a huge fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply an effect of how strong the Flexispot is.
The convenient cable television tray was a little bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the instructions.
You will require to purchase an anti-fatigue mat to stay comfortable, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (given that this indicated it was going to be tough) and likewise a little reluctant (since we all know just how much of a challenge assembling furniture can be).
Luckily, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t explained well in the directions.
Is it worth getting a standing desk?
As soon as put together, I enjoy the sleek look of this desk. I’m positive any of the many diverse surfaces that it can be found in would look terrific in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it simple, efficient, and peaceful to change between sitting and standing as often times as you desire throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a substantial home computer (or want to rest on it for some reason) it has you covered. It will also evenly disperse weight no matter how unbalanced the weight you place on it is, it will not wobble or wiggle.
in that video is quite kitted out as the desk we’re taking a look at today is pretty basic I attempted to get as near to that as I could on uplifts website with comparable setups the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is actually five inches longer however you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for evaluation however as you need to understand by now does not affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until completion of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can perhaps get doing not have even any cable television grommets for go through the outdoors container
for the desktop was not damaged in any way which is entirely unusual since I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply extremely rough guy if I had bought this I ‘d have been on the phone with customer care right away they did also handled to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function strangely absolutely where any sort of cable television management materials whatsoever the frame on this system is a single motor dual phase style versus the dual motor three-stage style that comes standard with the uplift desk this can be upgraded also to both the dual phase dual motor and a three-stage double motor which pushes the cost of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this model does come standard with the control board that allows for up-and-down movement plus three memory areas with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a cost would be the one benefit I would provide this system over the uplift desk and I want to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift design over 35% less expensive even if you update this flexi spot test to the dual motor three-stage style it still is available in a hundred and seventy dollars less expensive than the uplift however cheaper doesn’t mean cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that however the lateral stability of this desk the horizontal movement at this cost point it’s inappropriate it’s add insult to injury here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits the sound and this baffle is definitely frustrating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here damaged too my plan for this desk at this moment is to lose the desk top and included completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality workplace furnishings that will last you this at best seems like a more affordable replica of that it just doesn’t feel quality and the difference between this desk and my primary desk is night and day do feel free to check out their site too which also feels eerily similar to among their rivals there’s a wealth of devices you can get for the flexi spot desk up to and consisting of a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our precious time covering various options and devices I could however I believe I’m happier that they only sent a basic desk because as a basic desk I’m not a fan of the quality control at this price point and I do not believe slapping on a lot of additionals is the relocation when the core product isn’t what it must be they do use a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years extremely desk is five years and uplift desk is 7 years if you are Flexispot 41 Corner
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of video gaming and performance however I would invest the extra money it’s gon na take to get into a higher end producer like uplift desk or really desk and I haven’t personally used very desk items so I can’t speak on it however their credibility is excellent big thanks to flexi area for sending this out for review sadly I can not advise this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with viewing as how both the desktop and the casters showed up harmed however from a client viewpoint you ‘d probably be actually excited to get this in